[GreenKeys] bits and pieces WTB

[jcoward5452 at aol.com]

Greetings Group,
 I am new here,so bare with me if I don't have the correct parlance.
  I have been introduced to RTTY by a fellow listmember and I now have 
my first machine: a TT-176C/UG in the CW-354/UG case a.k.a. Teletype 
Corp. Model 28 in the "skintight" housing.This machine was up and 
running at the recent West Coast MRCG meet and what a great 
introduction for me into this aspect of Ham Radio.
  My first assignment was to strip off all the green "aftermarket" paint 
and get down to the original finish of a light grey.This I have done 
and it looks pretty good.However the case is lacking a few detail parts:

The copy door has two retaining latches but one is missing.It has three 
parts,the latch barrel,spring and thumb screw.

The "jewel' for the margin indicator lamp.

The copy holder that is mounted above the keyboard.This may or may not 
be the same as a standard Model 28.

I thought I had a swap deal to exchange a 4 ft. rack cabinet for a 6 
ft. one.That doesn't seem to be happening so if anyone in the San 
Francisco Bay area has a 6 footer with casters they want to offload I 
may be interested.
  What goes in the rack: Speaker panel,R-390A,CV-591A,Dovetron 
MPC-1000T-II,TT-176C, and various rack mounted power supplies.The idea 
being a self contained, mostly Boatanchor multi mode receing setup with 
power sources to be wired up to the work bench(s).

Thanks,
            Jay KE6PPF