[GreenKeys] death by teletype

[Don Robert House]

Too much heat.  Could be the machine is not getting enough ventilation  
or could be the typing unit needs lubrication, or both.

Don
K9TTY


On 5 May 2009, at 10:42 PM, kh-phillips at 9-5usa.org wrote:

For future reference, the problem was that the thermal circuit breaker  
on
the motor had tripped.  The solution was to press/reset that button.
Thanks to all who replied.  I guess a question remains as to *why* the
breaker tripped.

73
Kevin
KE5CQJ

> I need some help troubleshooting a 28KSR.  This past weekend I was  
> using
> it to work the ARI DX Contest.  It had worked fine until about 30
> minutes before the end of the contest when it "died" while copying  
> along
> as if the power had been cut.  The cabinet lights were still burning,
> however.  The motor will turn freely by hand.  I checked the fuse on  
> the
> LESU and it seems OK.  What else can/should I check?
>
> Thanks for any help and advice.
>
> 73
> Kevin
> KE5CQJ
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html