[GreenKeys] Additional relays for motor controls etc.

[Bill Henry]

I understand.  My ASR with reperf had two motors.   I assume that's 
standard.   Using external relays is a good idea.
Bill

At 12:34 PM 3/25/2009 -0700, Jeffrey Angus wrote:
> > Re:  ST-6, ST-5A/S, ST-6000, ST-5000 Motor Relays
> >
> > Guys, the relays used in HAL ST-6 and ST-6000 demodulators were P&B
> > KA11DA or Magnecraft W88X relays.  The contacts are rated at "10
> > amps" for 120VAC and 6A for 240 VAC.
>
>True, but the original question was if they could handle multiple machines.
>My suggestion was to use the ST-6 relay to drive additional relays outside
>the box for additional machines, accessories etc.
>
>Jeff
>
>______________________________________________________________
>GreenKeys mailing list
>Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:GreenKeys at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html