[GreenKeys] loop keyer and ST-8000A connector pins

[W2HX]

Here's some info
http://www.hertzmail.com/rtty/Tilson%20Loop%20Interface/


73 Eugene W2HX

-----Original Message-----
From: greenkeys-bounces at mailman.qth.net
[mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of Bill Strangfeld
Sent: Friday, June 26, 2009 10:36 AM
To: larryradio at worldnet.att.net; Greenkeys at mailman.qth.net
Subject: [GreenKeys] loop keyer and ST-8000A connector pins

Was there a post about the loop keyer that Larry describes?  I missed it.
Can anyone point to info about how to buy or build 
one?  Is it receive-only or will it accept transmit keying input from the
loop? 

For the ST-8000A, can someone help with part numbers from Mouser etc. for
the pins to insert in the original plugs?

A couple of us here in Ohio will be grateful for any help.

Thanks,
Bill W8FIX

>------- Original Message -------
>From    : Larry Tighe[mailto:larryradio at worldnet.att.net]
>Sent    : 6/25/2009 11:34:11 AM
>To      : Greenkeys at mailman.qth.net
>Cc      : 
>Subject : RE: Re: [GreenKeys] teletypewriter on ePay
>
 >I should've mentioned, BTW, that little loop keyer device that Tom has is
making the 8000 a real easy to use terminal.

You simply feed the RS 232 or Mil 188 into it and loop the magnet current
thru the other end....4 wires...2 in and 2 out.  The 
Dovetrons or the 8000 become so easy to use now without the extras normally
hanging on the terminal.  Thanks Tom.


______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html