[GreenKeys] The Milliwatt Supply...

[Jack]

I’m not sure if the milliwatt numbers are still available for installers to call into,

but the “call back” numbers are still used.  

There was also a number that we called into for “Quick Brown Fox...” to be sent

to a dial up TTY...there was a separate number for the TWX service (a 510-XXX-XXXX

dedicated Area Code in NY/NJ that’s long reused fro telephones). 

I worked for a small electronics company

before joining Ma Bell and we always called the QBF line to test our

acoustic modem products and the repackaged Teletype Model 33 TTY’s we sold with

them as “portable terminals”.  

 

 

 

From: greenkeys-bounces at mailman.qth.net [mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of TELEGRAPHER at att.net
Sent: Tuesday, February 17, 2009 12:09 PM
To: Don Robert House; greenkeys at mailman.qth.net
Subject: Re: [GreenKeys] The Milliwatt Supply...

 

In addition when techs were sent to the field they sometimes needed the same source of 1004 kc tone.  WECO made a portable unit specifically for that purpose J94071B Milliwatt Reference Generator). It supplied 1004 cycles at either 600 or 900 ohms impedance's. I've got one here.  Anyway it was battery powered and calibration was checked with a portable meter that was used with it (J94023D Transmission Measuring Set).  It reads levels in either 600 or 900 ohms.  It was also used with some switching test sets in the CO.  I've got one of them also and use it occasionally to verify some of the levels around the shack here.  Nice little portable meter with no batteries or ac/dc power needed.

As an added sidenote, just what you all wanted to read, back in the 70's we had a series of numbers that we could call from the field that would give us, time of day, a MW reference level tone and gobs of others for testing lines.  One of the neat ones was a ringback number that we would call after a telephone installation, hang up and then wait for it to call you back.  Particularly useful on 2 and more party lines.  If you didn't gt a call back and you were on a 2 party line, you had to redo something.  With some two pary lines it wasn't just a matter of flipping the T-R connection.  You had to go in and rewire the set to give the office a different ground value to see.  What a pain that one was.

Enuff!

Larry
W0OGH




 

-------------- Original message from Don Robert House <K9TTY at dls.net>: -------------- 


> I am spending too much time on this list. 
> 
> With the latest pains in my ear and throat I am bound to write 
> something incorrectly... 
> 
> Sigh... 
> 
> Deci = 10 Bel= named after Alexander G. Bell 
> 
> 1004Hz at 1 milliwatt into 600 Ohms 
> 
> This is a standard reference for over 100 years for voice message 
> circuits. 
> 
> One of these reference milliwatt supply is available in just about 
> every CO in the USA. 
> 
> Over copper wires, carrier systems, lightwave or whatever. 
> 
> Why did I have to dream about this last night... 
> 
> If you want to know more look it up in the Green or Red books... 
> 
> I guess you guys are getting to me. 
> 
> Don 
> K9TTY 
> ______________________________________________________________ 
> GreenKeys mailing list 
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys 
> Help: http://mailman.qth.net/mmfaq.htm 
> Post: mailto:GreenKeys at mailman.qth.net 
> 
> This list hosted by: http://www.qsl.net 
> Please help support this email list: http://www.qsl.net/donate.html 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/greenkeys/attachments/20090217/ac89421f/attachment.html