[GreenKeys] Looking for a stand-alone Loop Power Supply

[Jer]

Having wired up a st-6 or two and fixed a lot more in my past life, I
think you might be better served just keeping an eye out for a used
one on ebay.  They usually go for around $25 or so.

Mounting those boards, and doing all the wiring is time consuming.  So
unless you just feel like it for something to do, ebay would be a
better choice IMHO.

Jer

On Wed, Jul 2, 2008 at 9:31 PM, David Effa <wd9itr at arrl.net> wrote:
> Wow.  I did not think of that.  I am going to buy the ST-6 boards from
> Joe, K0BX, that he offered me.
>
> Thanks Jer for the idea.
>
> Dave, WD9ITR
>
> On Tue, Jul 1, 2008 at 11:22 PM, Jer <ttyman at gmail.com> wrote:
>> Just feed the audio output of the st-8000 into the inputs of the st-6
>> and plug the teletype into the st-6.  Volia, it works like a charm.
>> ST-8000 massages the incoming signal, feeds it into the st-6 which
>> turns on the teletype and prints through it.  Everyone is doing it.
>>
>> Its either that, or build your own loop supply, the st-6 idea is fast,
>> cheap, and works very well.
>>
>> Jer
>>
>> date    Tue, Jun 3, 2008 at 2:55 PM
>> subject Question on the LP-1200A availability for use with Amateur Radio
>> mailed-by       gmail.com