[GreenKeys] Recovering Platens

[Kevin King]

Try to look for copier parts outfits. Particularly a company that remans the
fuser rollers. My grey mater is not pulling the name of the out fit I used.
Reman on a fuser is similar to redoing a platen. Many lower fuser rollers
are made much the same as a platen is. 

-----Original Message-----
From: greenkeys-bounces at mailman.qth.net
[mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of riceguy at peoplepc.com
Sent: Friday, January 04, 2008 10:38 PM
To: greenKeys at mailman.qth.net
Subject: [GreenKeys] Recovering Platens

I called Ames Supply Company this morning to set up a shipment to have some
teletype platens recovered only to find out their are no longer doing this
service.

I have been on the web all afternoon looking for another source with no luck

If anyone else knows another source please pass on the info

Rice in ABQ


_______________________________________________
GreenKeys mailing list
GreenKeys at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/greenkeys