[GreenKeys] Can someone tell me what the Scope connector is on the back of the ST6000 converter?

[Ira B. Rothenhoefer]

Jim:

     I just got in from church and walked out to the 'shack out back'.
Thinking ST-6000 but I have 2 ST-6.  One of them has Molex connectors
and the other one doesn't.  Looking at it from the back, the left most 
connector, for the loop, has 6 pins. The one in the center for control, 
has, 6, which are sleeves.  The one on the right, for the scope, has 3 
pins.  

     So my thinking is the two outside ones are males and center is 
female....Any help????

BarneyNO0N



On Sunday 10 February 2008 08:46 pm, Jim Pruitt wrote:
Can someone tell me what the gender is for the scope connector  on the
 back of the ST6000 Hal converter?  I know it is a 3 pin Molex connector
 but need to know the gender.  I just acquired an ST6000 and that
 conenctor was busted off and so has nothing but holes in the pc board for
 it.

Thank you.

Jim Pruitt

_______________________________________________
GreenKeys mailing list
GreenKeys at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/greenkeys