[GreenKeys] Fwd: Bad News from eBay Member

[gil smith]

Hi Don:

Is this the lil' pecker you're lookin' for?

http://www.baudot.net/gil/tty-misc/28-typing-reperf-1d.jpg
http://www.baudot.net/gil/tty-misc/28-typing-reperf-1b.jpg

This is an NOS reperf still on the plywood, that I got from Jay Waller (now 
SK) -- destined for use in my asr one of these days.

I haven't the foggiest clue how it comes apart to get to the hammer.  Let 
me know what I can do.

gil




At 06:09 PM 11/16/2006, you wrote:
>The hammer head is for the M28 and M35 printer, not the reperforator.
>Back to square 1
>
>Don
>
>
>Hi, Don.
>
>I have returned from Australia, and received the tools.  I am a bit
>concerned, however, that I do not have the part you are looking for.
>I presume you were looking for the part described in the seller's
>listing as "NOS hammer head (aka pecker head) for model 28/35 new in
>the wrapper with part # 304740".  That item is labelled "HMR ASM",
>but does
>not fit your description above.  It is small metal assembly
>approximately 3/4 inch long.  On one end is a somewhat conical metal
>collar terminating with a round metal pin about 1/4 inch log and
>perhaps 1/16 inch in diameter, and on the other is a coil spring.
>Please let
>me know if I can be of any further assistance.
>
>Best regards,
>
>Bill
>
>
>_______________________________________________
>GreenKeys mailing list
>GreenKeys at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/greenkeys



Vaux Electronics, Inc.
480-354-5556
(fax: 480-354-5558)
www.vauxelectronics.com