[GreenKeys] On Freq or Off Freq???

[John Becker]

If you are using AFSK then you want a dial readout
of 3,682,125....

That will put your mark tone right on 3,680.

The frequency you call out should be the one your
mark tone falls onto. Otherwise say dial freq.

Hope this helps.

John, W0JAB


At 09:03 AM 3/8/06, you wrote:
>OK, got the RTTY going last nite.  Had a sked with Jack on 3.680.  Now, 
>what's the "correct"  procedure for this:  Do you put Mark on 3.680 or 
>your carrier?  I used LSB and injected the 2125 for Mark.
>
>Jack was looking for me on a  different freq.  How do most folks do 
>this?  I need to get my procedure correct.
>
>Many thanks to all,
>
>Larry
>K2JIA
>www.antiquetelephone.com