[GreenKeys] The J1 and 199413 Wrenches

[Don Robert House]

UPDATE

Teletype Part 129534

The J1 wrench used to adjust many parts in a M28 typing unit,  
especially the clutches.

It is a small double open ended wrench about 5/64 inch thick, and 2  
3/4 inches long.

The small open end is 3/16 inch and the large open end is 1/4 inch.

The J1 wrench is made of stamped steel that is apparently heat  
treated.  One side is stamped J1.
--------------------------------------
Teletype Part 199413

The 199413 offset wrench is used in many places where it is difficult  
to access the heads and nuts of small machine screws.

It is a long double offset open end wrench about 5/64 inch think, and  
6 3/4 inch long.

The small open end is 3/16 inch and the large open end is 1/4 inch.

The 199413 wrench is made of stamped steel that is apparently heat  
treated. One side is stamped 199413.
---------------------------------------
These two wrenches are the most commonly used wrenches in the tool  
catalog.

They may still be available through Telemechanics in New Jersey
http://www.telemechanics.com

73,
Don
K9TTY