[GreenKeys] how to feed paper tape 28 ASR?

[Don Robert House]

You can check with Fred Schmidt and Telemechanics to see if they are  
still available.  Otherwise I can lend you mine and you can find some  
sheet steel and make your own.

Don
K9TTY


On 17 Apr 2006, at 10:22 AM, Richard M. Gillingham wrote:

I sent this with an attachment to Eugene, no attachment to the list.

_____

Congrats on the new acquisition.

There's a special tool made specifically to de-crud the punch.  The part
number is 99947.  Here's pic of mine.  Not too good, I'm afraid.

It's brass with a small 'handle' soldered to one end.  The slot  
clears the
sprocket feed.

I'd send this one, but it's the onliest one I have.

Good luck

Gil, W1RG

----- Original Message ----- From: "Eugene Hertz" <ehertz at tcaf.org>
To: <greenkeys at mailman.qth.net>
Sent: Monday, April 17, 2006 10:11 AM
Subject: [GreenKeys] how to feed paper tape 28 ASR?


Hello all!

I am the now proud owner of a 28 ASR in resplendent condition! (thank  
you wa2hwj).  While playing around with my new toy, I tried to  
"backspace" the paper tape with a red tape b.s. button. It seems I  
have completely mangled the tape in the final gate where the holes  
actually punch.  (Now I think B.S. means something other than  
backspace hi!)

Can someone give me the trick how to open that punching gate so I can  
clear out the mangled paper and feed through some fresh paper? For  
the life of me I couldnt figure it out

Thanks
Eugene


_______________________________________________
GreenKeys mailing list
GreenKeys at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/greenkeys
_______________________________________________
GreenKeys mailing list
GreenKeys at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/greenkeys