[GreenKeys] Need sprocket feed paper

[wa2hwj at att.net]

Gil,
Use the backside of the greenbar stuff...! It's usually white.
Jack


-------------- Original message from gil smith <gil at baudot.net>: -------------- 


> Hi Don: 
> 
> I have an M33 that also uses the 8.5-wide sprocket paper. I found a roll 
> of it on ebay once. 
> 
> I also found new stuff available, as a special order, at OfficeMax. It was 
> a large box, fan-fold, and cost about $40. I never got any since it was 
> "green-bar" computer form paper. But it would fit. 
> 
> It may exist as plain white somewhere else (also likely special order), but 
> the green bar was the only new stuff I found. 
> 
> gil 
> 
> 
> At 09:24 AM 9/25/2005, you wrote: 
> >I am looking for a box of 8 1/2 inch wide form feed paper with 
> >perforations every 11 inches. 
> >This paper is for a sprocket feed Model 28, 32, 33, 35 or 37 Teletype 
> >machine. 
> >The paper including the feed holes must be 8 1/2 inches wide. 
> >This type of paper has no perforations on the sides, and so the feed 
> >holes do not tear off. 
> > 
> >Leads would be appreciated. 
> > 
> >Thanks 
> > 
> >Don 
> > 
> >Don R. House K9TTY 
> >drhouse at nadcomm.com 
> >http://www.nadcomm.org 
> > 
> > 
> >_______________________________________________ 
> >GreenKeys mailing list 
> >GreenKeys at mailman.qth.net 
> >http://mailman.qth.net/mailman/listinfo/greenkeys 
> > 
> 
> 
> 
> Vaux Electronics, Inc. 
> 480-354-5556 
> (fax: 480-354-5558) 
> www.vauxelectronics.com 
> 
> 
> 
> _______________________________________________ 
> GreenKeys mailing list 
> GreenKeys at mailman.qth.net 
> http://mailman.qth.net/mailman/listinfo/greenkeys