[GreenKeys] Need sprocket feed paper

[gil smith]

Hi Don:

I have an M33 that also uses the 8.5-wide sprocket paper.  I found a roll 
of it on ebay once.

I also found new stuff available, as a special order, at OfficeMax.  It was 
a large box, fan-fold, and cost about $40.  I never got any since it was 
"green-bar" computer form paper.  But it would fit.

It may exist as plain white somewhere else (also likely special order), but 
the green bar was the only new stuff I found.

gil


At 09:24 AM 9/25/2005, you wrote:
>I am looking for a box of 8 1/2 inch wide form feed paper with
>perforations every 11 inches.
>This paper is for a sprocket feed Model 28, 32, 33, 35 or 37 Teletype
>machine.
>The paper including the feed holes must be 8 1/2 inches wide.
>This type of paper has no perforations on the sides, and so the feed
>holes do not tear off.
>
>Leads would be appreciated.
>
>Thanks
>
>Don
>
>Don R. House K9TTY
>drhouse at nadcomm.com
>http://www.nadcomm.org
>
>
>_______________________________________________
>GreenKeys mailing list
>GreenKeys at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/greenkeys
>



Vaux Electronics, Inc.
480-354-5556
(fax: 480-354-5558)
www.vauxelectronics.com