[GreenKeys] loading 28asr tape

[steve brant]

Richard:

 Thanks, that worked.  Made a very long
angled cut and was able to load the tape. Thought it may be something
like that, but not sure.  I was thinking that teletype may have made a more
elegant loading process ... getting te tape around the gear and under 
the guide just
before the punches is quite a little task!.

The good news is it appears the punch is working just fine.

Now I need to practice on loading the tape.  There must be
a better way.

Thanks
Steve K8VII
 

Richard M. Gillingham wrote:

> We used to tear or cut the tape to a point to help it make the 
> bend.    It is a pita.
>
> Gil,
> W1RG
> ----- Original Message ----- From: "steve brant" <sbrant at tvspin.com>
> To: <greenkeys at mailman.qth.net>
> Sent: Sunday, November 06, 2005 7:21 PM
> Subject: [GreenKeys] loading 28asr tape
>
>
>> Good evening all
>> am rebuilding a 28asr and am attempting to see if
>> reperf works.
>>
>> whats the trick to load the paper tape?
>>
>> I can slide it down the guide and to the bottom of the guide
>> but it will not make the turn into the sprocket wheel so I can get it
>> to come out and over the wheel and thru the punches.
>>
>> Please Help
>>
>> Thanks
>> Steve K8VII
>> sbrant at tvspin.com
>>
>>
>>
>>
>> _______________________________________________
>> GreenKeys mailing list
>> GreenKeys at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/greenkeys 
>
>
>
>