{Spam?} Re: [GreenKeys] 32/33 Rubber Hammers

[Wayne Letourneau]

Subject: Re: {Spam?} Re: [GreenKeys] 32/33 Rubber Hammers
 
For years now I have been using the rubber feet ( 1/2 inch round rubber
circles) that I take off the bottom of some old keyboards. I rough up the
hammer a bit and glue them on with GOOD super glue. They will last about 6
month or so, I run my machine every day.
There is NO hot oil or anything else to contend with in a model 32 or 33.
They are free & work well. There really is no need to have special hammers
made.
Wayne wb0cte 
 
-------Original Message-------
 
From: Lester.veenstra K1YCM
Date: 07/30/05 12:39:43
To: wa2hwj at att.net
Cc: greenkeys at mailman.qth.net; gil smith
Subject: {Spam?} Re: [GreenKeys] 32/33 Rubber Hammers
 
Thats worth a try with a spare type wheel
 
wa2hwj at att.net wrote:
 
>I have been thinking of just slipping some shrink tubing over the
>hammer arm and sliding a bit of soft plastic/rubber between
>the face of the hammer arm and the tubing. Then, just give it some
>heat. Since the rubber hammer only slaps the entire typewheel,
>accuracy of the "hit" isn't that critical. We all know that the
>
>
 
_______________________________________________
GreenKeys mailing list
GreenKeys at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/greenkeys