[GreenKeys] TTY-Connect firmware

[gil smith]

Hi folks:

I have posted the TTY-Connect firmware 1.0 file and doc.  Sorry this has 
taken so long.  Files/pictures/docs are at:
http://www.vauxelectronics.com/gil/tty-connect/

I programmed the micros with the bootloader, but did not load the 
firmware.  You will need to load the firmware from a PC after your unit is 
built (it just takes a few minutes).  You will need a serial cable (DB9-F 
to DB9-M, straight-wiring) from the PC to TTY-Connect -- this is detailed 
in the firmware doc.

This release  includes:
   - All connection modes
   - Auto-CRLF insertion
   - Unshift on Space/CR
   - RX/TX diddle
   - TU-Data-Inversion
   - A couple of other sundry options

Note that the HoffNet features (selcal strings...) are NOT implemented in 
this release.

If you have any questions, let me know.

ps: I am going out of town Thursday, and won't be back to email (or 
greenkeys admin stuff) until Tuesday.

thanks,

gil



;  vaux electronics, inc.             480-354-5556
;  www.vauxelectronics.com (fax: 480-354-5558)
;-------------------------------------------------------------------------