[GreenKeys] Unshift on space

[Russmill47 at aol.com]

In a message dated 12/27/2004 11:20:06 A.M. Eastern Standard Time,  
davesigafoos at yahoo.com writes:

Does the  model 28 also have the same ability and if
so, how does one make the  adjustment.



Dave,
 
The M28 handles unshift-on-space within the stunt box. 
 
When a space is typed, it will pull a shift fork on the top part of the  
stunt box which, in turn, operates the bottom code bar and puts the M28 into  
lower case if it were in upper case.
 
About the middle of the top part of the stunt box at slot one is a bolt and  
locking nut.  If this bolt is run down into the top of the stunt box, it  
causes the front of the function pawl in slot one to tilt down, casing the rear  
part to raise. 
 
Front in this case is the business end of the stunt box which faces into  the 
guts of the M28. The rear is toward the stripper blade. 
 
If the function pawl is raised, it disables the downshift on space  feature.
 
If your M28 is not unshifting on a space character, the bolt should be  
backed out to a point when this function is enabled.
 
73,
 
Russ
WA3FRP