[GreenKeys] WRU and SELCAL

Tue, 27 Apr 2004 00:54:27 -0400

Hi Tony --

   There is no problem when using CR CR LF Ltrs Ltrs (or CR CR LF Figs Figs if the first character on the new line is in figures
case) with any of the sequences that I described.  The stuntbox will pick up on the CR CR LF part of the sequence and then be done
with its work.  Establishing the correct case for the beginning of the new line is good operating procedure.

73,
   -- Eric K3NA

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of tony j. podrasky
Sent: 2893 July 10 18:44
To: [email protected]
Subject: [GreenKeys] WRU and SELCAL

Hi All;

The problem using the sequence below is that people
who learned RATT on the MARS net use CR CR LF LTRS LTRS
to begin each line.

73,
tonyp / W6ESE / ex-WA2EAA
NNNNZCZC

>end of address code: CR CR LF.
>Detection of CR CR or CR LF should be sufficient to put
>unselected machines into the non-select state.
>For reasons discussed below, Figs H must also
>be interpreted as an end-of-address code.
>

--
Tony J. Podrasky | I wanted to find out just how much the Earth weighs
  tony.podrasky  | so I went into the bathroom and turned the scale
       @         | up-side-down. BAD PLAN: the scale was crushed beyond
     hp.com      | recognition.  I'm not strong enough to lift the
                 | Earth off of it, so now I'm stuck with a paper-thin
                 | scale on my bathroom floor.       - Tony J. Podrasky
_______________________________________________
GreenKeys mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/greenkeys