[GreenKeys] Model 28 Reperf punch block

Mon, 21 Jan 2002 14:31:50 -0800

Jack / John,

The TP159656 PUNCH BLOCK contains all the parts you need.  Teletype 
even includes a test tape that was punched by the block.  Comes in 
what looks like half of a toilet tissue roll with two end caps.  This 
one was manufactured and sealed in 1962.  I just opened it to look 
inside.  Three of the felts still have oil on them!

Don

>To change punchblock requires a conversion kit...made up of all the parts that
>have to be changed. The kit has its own part number. Have changed a number of
>chad punches to chadless type. Best know what you are doing before taking on
>this job. I think it would be easier these days to find a reperf that has a
>chadless punch block in it.
>
>John KC7BS...
>
>-------------------------------------------
>
>Jack wrote:
>
>>  My manuals don't list a part number for the pin since TTY says the
>>  punchblock has to be replaced as an assembly. The punchblock part numbers
>>  are in my email.
>>
>>  Thanks, Jack
>>
>>  _______________________________________________
>>  GreenKeys mailing list
>>  [email protected]
>>  http://mailman.qth.net/mailman/listinfo/greenkeys
>
>_______________________________________________
>GreenKeys mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/greenkeys

-- 
--------------------------------------------------------
Don Robert House, N.S.E.
Curator, NADCOMM
North American Data Communications Museum
3841 Reche Road
Fallbrook, CA 92028-3810
760-723-9943 Office
760-723-9984 FAX
URL: http://www.nadcomm.org
e-mail: [email protected]