From mnowack at comcast.net Tue May 24 18:24:15 2016 From: mnowack at comcast.net (Michael Nowack) Date: Tue, 24 May 2016 17:24:15 -0500 Subject: [Great-River-DX] Items for Sale Message-ID: <000001d1b60b$01ee1250$05ca36f0$@comcast.net> All, I have several items for sale the I would like to move to clear space in the garage. I have had these hanging or stowed in the garage for years and need to move them out to someone who will put them to use (or is looking to fill the empty spaces in their garage). 1. A pair of 9 element 2m beams with stacking and phasing kits. Made by Tany in Japan. Model 9Y2K beams. Each beam is 11 feet long and has 11 dB gain. Complete with the stacking kit. Stacked the gain will goes to 14 dB. These are in good condition and would require just the fabrication of the stacking kit cross boom to mast plate and U-bolts. I have the spec sheet for the beams but some details are in Japanese. These are well built and would stay in the air through Midwest weather. 2. A HyGain Model 28 long boom 8 element two meter beam. Catalog #2085 14 foot boom, 14.5 dB gain Needs some very minor work. Still sold by HyGain for about $100. Will Take 250W CW, 500W PEP, ICAS. I have the instruction manual for it. 3. A Rohn 20G top section. Reasonable shape but with one small crack in one leg near the top where it tapers in toward the mast tube. That should not cause any problem. It isn't new but would be quite serviceable in any installation. 4. 11 foot long foam filled fiberglass tube, 2-1/2 inch diameter, thick walled. New never used. I was going to make a linearly loaded 160 M vertical but never got the project going. 5. Rohn 25G fold over base plate. Used but in serviceable condition. Model BPH25G. These sell for $280 or more new. Any reasonable offer on items 1, 2, and 3 and they are yours. Item 4 is yours for the asking, but you have to haul it away. I would be asking $125 for item 5. I have other items which I will be posting As I have time, watch here for the emails. Mike NA9Q From jfunk at fossna.com Tue May 24 18:32:38 2016 From: jfunk at fossna.com (Jim Funk) Date: Tue, 24 May 2016 22:32:38 +0000 Subject: [Great-River-DX] [WIARC] Items for Sale In-Reply-To: <000001d1b60b$01ee1250$05ca36f0$@comcast.net> References: <000001d1b60b$01ee1250$05ca36f0$@comcast.net> Message-ID: Danny can you add these to the emailed newsletter version for June? Sent from my iPhone "He is no fool who gives up what he cannot keep to gain what he cannot lose." -- Jim Elliot > On May 24, 2016, at 5:24 PM, Michael Nowack wrote: > > To unsubscribe or make changes to your personal setting for the WIARC list, please go to http://mailman.qth.net/mailman/listinfo/wiarc > > > All, > > > > I have several items for sale the I would like to > > move to clear space in the garage. > > > > I have had these hanging or stowed in the > > garage for years and need to move them out > > to someone who will put them to use (or is > > looking to fill the empty spaces in their > > garage). > > > > 1. A pair of 9 element 2m beams with > > stacking and phasing kits. Made by Tany in > > Japan. Model 9Y2K beams. Each beam is 11 > > feet long and has 11 dB gain. Complete with > > the stacking kit. Stacked the gain will goes > > to 14 dB. These are in good condition and > > would require just the fabrication of the > > stacking kit cross boom to mast plate > > and U-bolts. I have the spec sheet for > > the beams but some details are in Japanese. > > These are well built and would stay in the > > air through Midwest weather. > > > > 2. A HyGain Model 28 long boom 8 element > > two meter beam. Catalog #2085 14 foot boom, > > 14.5 dB gain Needs some very minor work. > > Still sold by HyGain for about $100. Will > > Take 250W CW, 500W PEP, ICAS. I have > > the instruction manual for it. > > > > 3. A Rohn 20G top section. Reasonable > > shape but with one small crack in one leg > > near the top where it tapers in toward the > > mast tube. That should not cause any > > problem. It isn't new but would be quite > > serviceable in any installation. > > > > 4. 11 foot long foam filled fiberglass > > tube, 2-1/2 inch diameter, thick walled. > > New never used. I was going to make > > a linearly loaded 160 M vertical but never > > got the project going. > > > > 5. Rohn 25G fold over base plate. Used > > but in serviceable condition. Model BPH25G. > > These sell for $280 or more new. > > > > Any reasonable offer on items 1, 2, and 3 and > > they are yours. Item 4 is yours for the > > asking, but you have to haul it away. I would > > be asking $125 for item 5. > > > > I have other items which I will be posting > > As I have time, watch here for the emails. > > > > Mike NA9Q > > > > ______________________________________________________________ > WIARC mailing list > Home: http://mailman.qth.net/mailman/listinfo/wiarc > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:WIARC at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html