[GPS_Standard] enclosure suggestions for VE2ZAZ GPSDO project

[robert bownes]

I reused a 3U rackmount enclosure for an ISDN router that was hanging about
in the basement for mine. It already had the a decent power supply, punch
outs in the back for several DB connectors and LED status lights on the
front. I pulled the fan out however.

It lives in a well controlled thermal environment, so the oven doesn't see
really wild swings.

Bob.


On Thu, Jan 30, 2014 at 3:54 PM, John Shadle <shadle at katzenfisch.com> wrote:

> Hi all,
> I'm finally thinking about getting on this project. I've had the PC board,
> GPS, TXCO, parts, etc. for *years*. If they were perishable food, they'd be
> rotten by now. ;-)
>
> In any case, one thing which I'm lacking is a proper enclosure for this
> project. I'm looking for something easy to drill and nice-looking, but not
> something that will break the bank. Can anyone offer Mouser or Digikey
> parts numbers for their builds?
>
> Thanks!
> -john W4PAH
> Madison, WI
> ______________________________________________________________
> GPS_Standard mailing list
> Home: http://mailman.qth.net/mailman/listinfo/gps_standard
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GPS_Standard at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>