[GPS_Standard] HP10811-60111

[Zack Widup]

When I get the time to put this all together, I'm going to try the circuit 
with an Isotemp 118 OCXO.  This OCXO supplies an 8.3 volt reference output 
to be used for the electrical tuning of the oscillator (0 to +8 volts 
range). 

I think the HP 10811 uses a -5 to +5 volt tuning range, correct?

I may get one of those on eBay and try it, too.

73, Zack W9SZ

On Thu, 18 Jan 2007, Bert, VE2ZAZ wrote:

> Hi Noris,
> 
> Welcome to the list.
> 
> I believe the HP10811 and HP10544 series oscillators are the OCXO the most
> used with this project. These are the units I recommended using and they are
> readily available on Ebay. Literature is also available on the Web for free.
> So go ahead and have fun!
> 
> Bert, VE2ZAZ
> 
> ----- Original Message -----
> From: "Noris Battaino Udine - Italy - IW3SGG" <iw3sgg at ir3arp.net>
> To: <gps_standard at mailman.qth.net>
> Sent: Wednesday, January 17, 2007 6:43 PM
> Subject: [GPS_Standard] HP10811-60111
> 
> 
> Hi!
> I'm Noris IW3SGG from Italy.
> I have an oven oscillator HP10811-60111.
> Sameone of you have build the gps controller of VE2ZAZ with this
> oscillator?????
> Works???
> 
> Sorry for bad english!
> Best regards.
> Noris.