[Gonset] WTS: Need Power Xfmr - Will Swap Elmac PSR-6

[kd4e]

We are building a PS for a Gonset G-66B/Multi-Elmac AF-67
station and need the hv power transformer.

We need a sturdy and load-tested transformer (don't want
to build a PS around an old used untested xfmr only to
have it fail).

Here are the *minimum* specs for the PS
----------------------------------------------------------------------
500vdc @ 200ma for the plates.

250vdc @ 100ma for tx exciter stages & receiver power.

-24vdc for the mod bias. (we have a separate xfmr for this if needed)

12vdc @ 3a for filaments (we have a separate xfmr for this if needed)
----------------------------------------------------------------------

We have an Elmac PSR-6 to Swap. (I have no 6VDC source so cannot test)

-- 

Thanks! & 73, doc, KD4E
Personal: http://bibleseven.com/kd4e.html