[Gonset] Re: Gonset Digest, Vol 20, Issue 3

[doc]

Thanks!

The Ham who is buying the PS was satisfied
with knowing the Mod. tubes were getting
filament voltage sufficient to be the good
little glowbugs that they should be!  :-)

I was selling all of the Gonset stuff as-is
because I didn't want to be taking things
apart or building the missing 12-pin power
cable.

As of now both Mod/PS's have been sold.  The
G-77 is on ebay and if not sold there I will
post it here.  I also still have the G-77a
transmitter and the G-66b receiver w/matching
PS and Speaker.

I do not prefer to put them on ebay but if
not sold here soon will have to do so as I
need the funds to cover the G-76 w/Spkr/PS
I have agreed to buy.

Thanks! & 73, doc kd4e

> If you want to check the HV section of the transformer, disconnect the HV 
> rectifiers and measure the AC transformer output on the HV leads using your VOM.  
> You can them reconnect the rectifiers and measure the HV DC output at the 
> filter capacitor using your VOM.
> 
> Glenn K6PZT