From btuttleman@worldnet.att.net  Mon Jun  3 15:38:37 2002
From: btuttleman@worldnet.att.net (Barry)
Date: Mon, 03 Jun 2002 07:38:37 -0700
Subject: [GE] FS: GE Repeater Manuals
Message-ID: <3CFB7F6D.59542C57@worldnet.att.net>

for sale:

1)GE MASTR II Repeater Station Combination Maintenance Manuals:
LBI-31897, covering DeskMate/Pole Mt/Floor Mt. Tone Remote/Repeat, DC
Remote/Repeat models; over an inch thick, includes 
LBI-31899 Description/Maintenance, 
LBI-31291A MASTR II 406-512mhz 100W Xmter (Mobile & Station) 
LBI-30025D  MASTR II 406-512mhz Receiver
LBI-4986  IF/Audio & Squelch Board 19D417707G1,G2 & 19D432667G1,G2,G3 
LBI-30867F MASTR II Base Station 60hz Power Supply 19D430272G1,G2,G4,G5
w/ Hum Suppression 
LBI-31851B DC Remote & DC Remote/Repeater Control Panel 19B234871 P21-29
LBI-31056G MASTR II Programmable Channel Guard 19D432500G1-3 
LBI-31123D MASTR II Station Programmable Channel Guard (Encode Only)
19C331044G1 .  
FULL schematics, in "as new" condition!  ALL factory original manual
sets.  2 available.

2)as above, LBI-31897 Remote/Repeater Station Combination
but contains the following maintenance manuals:
LBI-31899 Description & Maintenance
LBI-31291A  MASTR II UHF Xmitter mobile/station, 100W 
LBI-30025D  MASTR II UHF RX (includes RF mixer/filter/osc/mult/if-au/sq
LBI-30867E  Base Station 60hz Power Supply 19D430272G1,G2,G4,G5 (Hum
suppression options 9647 - 9650)
LBI-31851A  DC Remote Repeater Control Panel 19B234871 P21-28 w/
revision package
LBI-31056G  MASTR II Programmable Channel Guard 19D432500 G1-3
LBI-31123D  MASTR II Station Programmable Channel Guard (Encode Only)
19C331044G1 w/ one revision
2 available, all factory original, in "as new" condition.  note that the
difference is in the power supply manual!

$17.50 each + actual USPS shipping charges, lower 48; please email
replies OFFLIST, i typically only subscribe to merely post an ad very
occasionally
tnx in advance.
barry
carson city, nv
http://home.att.net/~btuttleman2/electron.html

From wp4mxb@hotmail.com  Fri Jun  7 03:54:25 2002
From: wp4mxb@hotmail.com (Carlos Quinones)
Date: Thu, 6 Jun 2002 22:54:25 -0400
Subject: [GE] Re: Contents of GE digest
References: <20020603160138.30C0532878D@mailman.qth.net>
Message-ID: <OE28zvjtR6Tc29Gc2I800005b9b@hotmail.com>

Hi i am looking for service manual for a MASTR EXECUTIVE II COMB. 82A01
(DVR16HS) repeater or the pinout for it can any one help me?

----- Original Message -----
From: <ge-request@mailman.qth.net>
To: <ge@mailman.qth.net>
Sent: Monday, June 03, 2002 12:01 PM
Subject: GE digest, Vol 1 #14 - 1 msg


> Send GE mailing list submissions to
> ge@mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/ge
> or, via email, send a message with subject or body 'help' to
> ge-request@mailman.qth.net
>
> You can reach the person managing the list at
> ge-admin@mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of GE digest..."
>
>
> Today's Topics:
>
>    1. FS: GE Repeater Manuals (Barry)
>
> --__--__--
>
> Message: 1
> Date: Mon, 03 Jun 2002 07:38:37 -0700
> From: Barry <btuttleman@worldnet.att.net>
> Reply-To: btuttleman@worldnet.att.net
> Organization: BDT Enterprises
> To: ge@mailman.qth.net
> Subject: [GE] FS: GE Repeater Manuals
>
> for sale:
>
> 1)GE MASTR II Repeater Station Combination Maintenance Manuals:
> LBI-31897, covering DeskMate/Pole Mt/Floor Mt. Tone Remote/Repeat, DC
> Remote/Repeat models; over an inch thick, includes
> LBI-31899 Description/Maintenance,
> LBI-31291A MASTR II 406-512mhz 100W Xmter (Mobile & Station)
> LBI-30025D  MASTR II 406-512mhz Receiver
> LBI-4986  IF/Audio & Squelch Board 19D417707G1,G2 & 19D432667G1,G2,G3
> LBI-30867F MASTR II Base Station 60hz Power Supply 19D430272G1,G2,G4,G5
> w/ Hum Suppression
> LBI-31851B DC Remote & DC Remote/Repeater Control Panel 19B234871 P21-29
> LBI-31056G MASTR II Programmable Channel Guard 19D432500G1-3
> LBI-31123D MASTR II Station Programmable Channel Guard (Encode Only)
> 19C331044G1 .
> FULL schematics, in "as new" condition!  ALL factory original manual
> sets.  2 available.
>
> 2)as above, LBI-31897 Remote/Repeater Station Combination
> but contains the following maintenance manuals:
> LBI-31899 Description & Maintenance
> LBI-31291A  MASTR II UHF Xmitter mobile/station, 100W
> LBI-30025D  MASTR II UHF RX (includes RF mixer/filter/osc/mult/if-au/sq
> LBI-30867E  Base Station 60hz Power Supply 19D430272G1,G2,G4,G5 (Hum
> suppression options 9647 - 9650)
> LBI-31851A  DC Remote Repeater Control Panel 19B234871 P21-28 w/
> revision package
> LBI-31056G  MASTR II Programmable Channel Guard 19D432500 G1-3
> LBI-31123D  MASTR II Station Programmable Channel Guard (Encode Only)
> 19C331044G1 w/ one revision
> 2 available, all factory original, in "as new" condition.  note that the
> difference is in the power supply manual!
>
> $17.50 each + actual USPS shipping charges, lower 48; please email
> replies OFFLIST, i typically only subscribe to merely post an ad very
> occasionally
> tnx in advance.
> barry
> carson city, nv
> http://home.att.net/~btuttleman2/electron.html
>
>
> --__--__--
>
> _______________________________________________
> GE mailing list
> GE@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/ge
>
>
> End of GE Digest
>

From wp4mxb@hotmail.com  Tue Jun 18 00:49:24 2002
From: wp4mxb@hotmail.com (Carlos Quinones)
Date: Mon, 17 Jun 2002 19:49:24 -0400
Subject: [GE] Manual wanted for GE MASTR EXEC. II
Message-ID: <OE18jW7DTIN1cj9hj1C00008f37@hotmail.com>

Hi i am looking for service manual for a MASTR EXECUTIVE II COMB. 82A01
(DVR16HS) mobile  repeater or the pinout for it can any one help me?


Carlos E. Quinones (wp4mxb)
Calle Aleli K-31 Jard.2
Cayey PR 00736
Ph: (787)738-6776
Home:  wp4mxb@hotmail.com
Work: cquinones@altadisusa.com


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---

From engine.driver2@verizon.net  Tue Jun 18 21:02:08 2002
From: engine.driver2@verizon.net (Truckie)
Date: Tue, 18 Jun 2002 16:02:08 -0400
Subject: [GE] MPA software
Message-ID: <002801c21703$07ad3dd0$0200a8c0@TRUCK11>

I asked this question many moons ago and like a fool did nothing about it
can anyone tell me where I can get software for an MPA and what it will cost
me?

Thanks
Sean


From vadams@imagin.net  Thu Jun 20 02:52:46 2002
From: vadams@imagin.net (v adams)
Date: Wed, 19 Jun 2002 20:52:46 -0500
Subject: [GE] Phoenix radio
Message-ID: <3D11356E.F20E644C@imagin.net>

Wanted:

I have acquired a broken GE Phoenix SX comb. N55HH1W40TB 
I am looking for a service manual or a copy of the schematics of
anything that is close to get this puppy on the air.

V. Adams
KC5OWU

From Richard.McClung@Dielectric.spx.com  Fri Jun 21 00:35:22 2002
From: Richard.McClung@Dielectric.spx.com (Richard.McClung@Dielectric.spx.com)
Date: Thu, 20 Jun 2002 16:35:22 -0700
Subject: [GE] New to the list
Message-ID: <OF3E8FA2C3.8DE36646-ON85256BDE.008188DC@spx.com>

This is a departure from what I see in the archives but it GE radio
associated..............
I'm trying to find an old GE table model SW RCVR like I had when I was a
kid. It was the GE Model X-226.
Anyone have any SAM's, Rider's information or one of the RCVR's you'd like
to part with.........???????
RICH  WA6KNW    WPE6AKQ



From ka6uup@pacbell.net  Fri Jun 21 14:17:26 2002
From: ka6uup@pacbell.net (ka6uup@pacbell.net)
Date: Fri, 21 Jun 2002 06:17:26 -0700
Subject: [GE] Re: GE
References: <20020621080123.D5CED328944@mailman.qth.net>
Message-ID: <3D132766.F1DCCD63@postoffice.pacbell.net>

Guys, 
(I should mention I know absolutely nothing about GEs. This is
what I was told By P.O Any errors are due to pure ignorance ;-])

 I have 4 Ea. Master ll xceivers, two control panels, two mikes, a box
full of wiring harnesses, and a bunch of documentation. The P.O. was
going to convert these into a 6M and a UHF remote base.
There are two good units. A UHF (450??MHz) and a low band VHF (40??MHz.)
Both have been classified as "good spares."
 One of the other units has a tag which says "No squelch. No receive. In
use during lightening strike." I assume it is only good for parts.
 The other unit has a tag which says "Low receive sensitivity." I
understand this is a known and easily repaired problem requiring a
cleaning of a cavity??
I would like to sell all as apackage but have no idea of a fair value.
So I am asking your advice on a price for the whole package.
Thanks
Chuck
ka6uup@pacbell.net

From ka6uup@pacbell.net  Fri Jun 21 18:36:55 2002
From: ka6uup@pacbell.net (ka6uup@pacbell.net)
Date: Fri, 21 Jun 2002 10:36:55 -0700
Subject: [GE] Re: GE masterll
References: <20020621080123.D5CED328944@mailman.qth.net>
Message-ID: <3D136437.59D83C89@postoffice.pacbell.net>

Here are the Combination Nos

MX65KAS88B
MC74KES33A
MX65KGU88A
MC74KFS33A

The reference to 40 mHz was only a guess on my part
Thanks,
Chuck

Guys, 
(I should mention I know absolutely nothing about GEs. This is
what I was told By P.O Any errors are due to pure ignorance ;-])

 I have 4 Ea. Master ll xceivers, two control panels, two mikes, a box
full of wiring harnesses, and a bunch of documentation. The P.O. was
going to convert these into a 6M and a UHF remote base.
There are two good units. A UHF (450??MHz) and a low band VHF (40??MHz.)
Both have been classified as "good spares."
 One of the other units has a tag which says "No squelch. No receive. In
use during lightening strike." I assume it is only good for parts.
 The other unit has a tag which says "Low receive sensitivity." I
understand this is a known and easily repaired problem requiring a
cleaning of a cavity??
I would like to sell all as apackage but have no idea of a fair value.
So I am asking your advice on a price for the whole package.
Thanks
Chuck
ka6uup@pacbell.net

From w4dg@arrl.net  Fri Jun 21 21:49:52 2002
From: w4dg@arrl.net (Dennis Griffin)
Date: Fri, 21 Jun 2002 16:49:52 -0400
Subject: [GE] base station control panel
Message-ID: <002201c21965$39ce2e00$5f8dfea9@tampabay.rr.com>

Hello all:

Can anyone on the list scan for email or FAX me, the schematic of the GE =
control panel # 19D417214G1 (rev D) ?

I just purchased a complete manual but it contains the tone remote =
control panel and not the control panel installed in the Deskmate Base =
Station.

If someone has the LBI for the above control panel (9 drawer capacity =
with the 10v regulator plug-in board on the far right) I would be glad =
to reimburse for any copying expense etc. to get a copy of the complete =
LBI.

But a simple scanned schematic will do.  If anyone can help, please send =
scan attachment directly to w4dg@arrl.net . If a fax is necessary, again =
please contact me off list, for my FAX number.

TNX & 73......Dennis Griffin W4DG

Home Page: http://home.tampabay.rr.com/dgriffi9

GOD BLESS AMERICA!


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---

From engine.driver2@verizon.net  Tue Jun 25 06:17:51 2002
From: engine.driver2@verizon.net (Truckie)
Date: Tue, 25 Jun 2002 01:17:51 -0400
Subject: [GE] Trunking question
Message-ID: <003801c21c07$a7d09a10$0200a8c0@TRUCK11>

When a dispatcher "stings" a radio does it damage the radio in anyway or
merely disable it? Also when it is Stung what is needed to unlock it will
simple RSS do it or does it need something more complex?

Reason im asking is someone got hold of a FD radio the other day and was
transmitting on it trying to find out who it belonged to long story short he
was just trying to return it to the owner but it got me to thinking why
didn't they just sting it? isn't that what the ability to sting a radio is
for?

Just random thought in the middle of the night :))

Sean


From engine.driver2@verizon.net  Thu Jun 27 15:37:16 2002
From: engine.driver2@verizon.net (Truckie)
Date: Thu, 27 Jun 2002 10:37:16 -0400
Subject: [GE] M-PA Programming
Message-ID: <003901c21de8$22e24eb0$0200a8c0@TRUCK11>

  couple questions:

1. is there a kayboard trick to force a 450-470 radio down into the 70cm ham
band?
2. if I do not program a pl tone will the radio receive on all pl tones? or
how does one disable pl on a specific channel?

thanks in advance
Sean


From engine.driver2@verizon.net  Thu Jun 27 15:38:23 2002
From: engine.driver2@verizon.net (Truckie)
Date: Thu, 27 Jun 2002 10:38:23 -0400
Subject: [GE] Batlabs equivalent for GE radios?
Message-ID: <003a01c21de8$4bdcb990$0200a8c0@TRUCK11>

 Is there a batlabs equivalent to batlabs.com? I'm specifically looking for
info on what one can do with the various combos of Delta heads and whatnot

thanks
Sean


From engine.driver2@verizon.net  Thu Jun 27 18:17:26 2002
From: engine.driver2@verizon.net (Truckie)
Date: Thu, 27 Jun 2002 13:17:26 -0400
Subject: [GE] MPA/PCS programming cables
Message-ID: <005301c21dfe$83186d30$0200a8c0@TRUCK11>

can anyone recommend a place to purchase an M-PA and or a PCS programming
cable?

Thanks
Sean


