[GCARC] FREE Rigblaster Nomic

[Agustin Neron Properties LLC]

Hi all,
I have a Rigblaster Nomic (West Mountain Radio) I came across. I had this set up around 2010 for RTTY when I went to V26E. It worked well, and was easy to set up.
It is a very small box, and very simple setup. It worked great with my Icom 756 Pro III that I had at the time.
 
FREE to first person who responds. Great way to try out digital or RTTY without investing $ first. I'm including the Radio to Nomic cable (8 pin Foster that was wired for Icom), and  a short 3.5mm male both ends cable for autio in or out. There are 2 jacks so you will need a 2nd cable (one for IN one for OUT for the sound card or for the audio in/out jacks on your PC).
 
Requires a serial cable (has female DB9 builtin).
This was a bare bones solution at the time, and does not have a builtin sound card, so you will either need an external one, or use your computer's sound card.
Manual downloadable at West Mountain Radio.
 
73
Darrell AB2E