[GCARC] AB2E mast raising Oct 1/full crew now!

[Agustin Neron Properties LLC]

Hi all,
OK making this a new message (tried replying to original message and got some .eml error that the message was not allowed?).

OK

We now have an all-star cast!

W0MHK Bill
N2SRQ Charlie
KN2U Ken
WK2G Merrill
K3TS Tony, and myself.

See all of you at 10a Sat, Oct 1.
Food at Elmer Diner on Rt 40 right after the tower is up!

Thanks again to you all, and 73
Darrell AB2E

>     Hello all,
>     We still need 3 ground crew to keep the guy wires tight as we raise each section of the tower. Please help if you can, this will only take about an hour Sat morning Oct 1, at 10AM. Please RVSP to me at ab2e at comcast.net mailto:ab2e at comcast.net so I know who is coming.
>     I'm treating everyone to breakfast or lunch at Elmer Diner afterwards!
> 
>     Thanks and 73, Darrell AB2E
> 
>     33 Buck Rd, Monroeville (1/4 mile south from Schober's Farm heading towards Rt 40 on the right)
> 
> 
> 
>         > > On 09/11/2022 7:58 PM Agustin Neron Properties LLC <ab2e at comcast.net mailto:ab2e at comcast.net > wrote:
> > 
> >         Hi all,
> >         On Sat Oct 1, we are putting up one of my AB-577 military masts (yes, the same one we use every year at FD!).
> >         We'll set an exact time when it gets closer, but will be in the morning, and should take only about an hour.
> > 
> >         Tony K3TS, Merrill WK2G, and myself will be putting up the mast.
> >         We need 3 or 4 helpers to man the guy wire assemblies and fasten them to the stakes as we raise the tower.
> > 
> >         Just like FD, Tony and I will lay out the setup Fri and hopefully things will go that much smoother Sat morning..
> > 
> >         At the top will be a 5el 6m yagi, the M2 6M5X, and below that a Force 12 C3SS mini tribander. This will be rotated by a Yaesu G800DXA (something we don't have at FD). So with the mast the 6m yagi will be close to 60ft, and the C3SS at around 55ft.
> > 
> >         Spectators welcome!
> > 
> >         Please RSVP to me if you can make it.
> > 
> >         Thanks and 73,
> >         Darrell AB2E
> > 
> > 
> >     >