[GCARC] Need some antenna help
Tony Starr
tstarr1450 at gmail.com
Sat Mar 19 20:15:09 EDT 2022
Lou,
I don't really know anything about the WIRES-X system, but any VHF antennas
that are 10 feet apart are too close together for simultaneous in-band
operation. The fact that you are having problems without even transmitting
sort of confirms this, unless there is some other problem with your digital
equipment. I can de-sense my 2m transceiver with a kilowatt of HF power,
simply because my antennas are close together. You don't necessarily need
to get rid of any radios, but you may not be able to use more than one of
them at a time, Good antenna switches that ground the coax when not in use
can prevent front end damage, and yes, it can happen even with the radio
turned off if you couple enough RF into the input.
73, Tony K3TS
On Fri, Mar 18, 2022 at 11:10 PM Lou Bonaventura <n2jxg at lbon.net> wrote:
> Hi all,
>
> I'm looking for the antenna gurus here hi hi.
>
> In my attic (yeah, HOA) I have (1) 2mtr vertical, (1) 2mtr/70cm
> vertical, and (1) 6/2/70cm vertical antennas.
>
> The 2mtr is connected to a FTM-200D for Wires-X PDN (50w, on 144.975 MHz).
>
> The dual band is connected to a FTM-6000R (50w).
>
> The triband is connected to a 991A (50w).
>
> Whenever the PDN is active, the other radio's tx/rx is reduced to
> practically nothing, even if the PDN is just receiving. I use my HT to
> connect to the PDN, or my mobile in my Jeep when I'm not at the house.
>
> If I have the PDN in Direct Mode there is no issue, just when it's in
> Access Point Mode.
>
> I'm pretty sure it's some type of antenna coupling, one feeding into the
> others, but I'm not sure how to resolve it other than getting rid of
> some radios, but I don't want to do that.
>
> The 2mtr Wires-X antenna is 10+ feet from the dual band and about 25
> feet from the triband.
>
> The dual band is about 10+ feet from the triband.
>
> Yes they are all in a line from each other due to the roof peak in the
> attic.
>
> The 991A has no interference on lower bands and that is on a tuner
> connected to my outside gutters, so no problem there, but I'm sure it's
> still feeding RF into the radio.
>
> Any thoughts on resolving this issue before I burn something up? I don't
> like that it's feeding into the other radios.
>
> Thank you and 73!
> Lou
>
>
> --
>
> N2JXG
> Savannah, TN / Sewell, NJ
> /Ask for my current QTH when we make contact!/
>
> TN Grid Square: EM55
> NJ Grid Square: FM29
>
> *Wires-X:* 144.975 Simplex
>
> /All nodes below are public./
>
> Stationary Node/Room (NJ): 74903 / 84903 / N2JXG-ND
>
> Mobile Node/Room: 74933 / 84933 / N2JXG-RV
>
> Portable Node/Room : 74903 / 84903 / N2JXG-FT3D
> ______________________________________________________________
> GCARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/gcarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GCARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the GCARC
mailing list