[FreeBay] Need Bandspread knob for Realistic DX-160 receiver

Fri, 8 Mar 2002 19:01:19 -0500

Phil, my friend, it didn't take long. When I opened the garage door I
thought I saw somthing scurrying under the bench , and sure enough, there
were two of them little beggars behind a box, (Twins). they are 1 3/4 in. in
dia. black with a nice shiny aluminum face. 1/4 in. shaft with setscrews.
Give me an address and they are yours, no charge, no postage , no nothing
except waiting til I can get to the post office, probably monday!! tomorrow
is our anniversary so not much will get done!!  hi ! hi !
  let me know when you can!!!
   carl / kz5ca
----- Original Message -----
From: "Phil Atchley" <[email protected]>
To: <[email protected]>
Sent: Friday, March 08, 2002 5:42 PM
Subject: [FreeBay] Need Bandspread knob for Realistic DX-160 receiver


> Hello all
> I have a very nice DX-160 shotwave receiver (70s vintage analog).  Only
> problem is it has the wrong knob for the bandspread position.  The knob is
> the same as the main tuning knob, has the "split knurled" shaft (push on
> knob), is about 1 1/4 inch diameter, black plastic with aluminium "front".
>
>  In the event I can't find the right knob I'd be interested in finding two
> "almost right" knobs for the main and bandspread tuning.  Even slightly
> larger up to about 1 3/4 inches MAXIMUM would be ok.
>
> I may have a part you need for swap or??
>
> 73 de Phil  KO6BB
> Loving home provided for wayward Boatanchor Receivers
> [email protected]
> Merced, Central California
> 37.18N 120.29W CM97sh
>
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.330 / Virus Database: 184 - Release Date: 2/28/02
>
> _______________________________________________
> FreeBay mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/freebay