[FreeBay] Need small 3.500 MHz Crystal

[Philip B Atchley]

Hello.
I need a small 3.500MHz Crystal to replace the 4.00 Xtal in my Homebrew
Longwave converter (converts 0-500kHz to 3.5-4.0MHz).  I want to change
to a 3.5 3.5MHz Xtal as the converter presently tunes "backwards" down
from 4.0MHz. The Xtal I'm using is the usual small size of about 1/2 x
3/8 inches with solder leads, but I could use either solder-in or plug
in.
  
Yes, I have several 3.579545MHz Xtals removed from old VCR's, but they
would "offset" my actual frequency by almost 80kHz and I need to be able
to read frequency much closer than that. 

I can probably swap you a 4.00, 5.0, 15.0, 16.0, 7.200, 14.31818, 10.240,
3.5795 MHz (ALL solder in) or other Xtal for it. Cost is a limiting
factor here as there is about no budget for this project.  

73 de Phil  KO6BB
Loving home provided for wayward Boatanchor Receivers
ko6bb@juno.com
Merced, Central California
37.18N  120.29W  CM97sh

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.