[FPARC] Cable 63: Motorola 16-pin Maxtrac GM300 VHF UHF Repeater

[Dennis]

$7.49 plus $3.00 shipping:


(One) 36" shielded cable assembly with perfect-fit latching plug at one end to mate with Motorola radios having a 16-pin rear accessory connector, i.e.:  M10, M100 & M200 series, M1225, Radius, Maxtrac, GM300, etc.

All my kits feature connector shells and contact pins manufactured by AMP, the same supplier used by Motorola.  The AMP parts in my kits are identical in quality and precision to the AMP parts found in "Motorola brand" kits.  The pre-attached contact pins in my kits are professionally installed to AMP specifications using automated AMP tooling, for a perfect fit and flawless mechanical and electrical connection.  Check out the positive feedback from hundreds of satisfied customers who've discovered the quality and value of connector kits from MRE1032.

This cable assembly features a high quality, flexible, 4-conductor cable with individually color-coded, stranded 24 awg conductors and an overall foil shield with drain wire (5-conductors total).   

Five (5) pins of the radio connector are brought out to flying leads.

This cable is wired as follows:

Pin #

2     MIC                                             WHI          (use this input for speech audio - see Notes below)

3     PTT                                            BLK

11   Receive Audio                            GRN

8     Programmable Output (COR)     RED 

7     Ground                                       Bare (drain wire)
15 -16  Jumpered to enable internal speaker



http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=350188820923&ssPageName=MERC_VI_RCRX_Pr4_PcY_BIN_Stores_IT&refitem=120385918549&itemcount=4&refwidgetloc=active_view_item&usedrule1=CrossSell_LogicX&refwidgettype=cross_promot_widget&_trksid=p284.m184&_trkparms=algo%3DCRX%26its%3DS%252BI%252BSS%26itu%3DISS%252BUCI%252BSI%26otn%3D4