[Fox_Tango] HELP! needed to un-CB a FT-902DM and restore 10M

[fox_tango@mailman.qth.net]

Check the "XTAL Unit" for any modifications...Such as removal any=20
capacitors from the circuit or substituting another value.  Some smart*ass=
=20
may have modified the board to make his crystals work.

If all looks correct, put one of your new crystals in the proper socket and=
=20
CAREFULLY rock the associated coil for this crystal cw and ccw.  Mark your=
=20
start point, so that you can more or less come back to it....For example in=
=20
the FT901:

1.  insert the 42487.5 KHz into the 1=D8a socket.
2.  Carefully adjust the associated coil (T13=D86 in the FT9=D81D)

Another possibility is that the VCO unit has been played with:

Misalignment of T12=D86 and T12=D87 (FT9=D81D) may also cause a problem with=
 the=20
1=D8m section of the rig.

The above are the only areas that I can think of that may have been messed=
=20
with.

Good Luck es 73,
Jay/AF2C

At 01:24 PM 4/3/02 -0500, you wrote:
>Thanks - but I pulled the yaesu xtals in my 901DM and  put it in the
>902DM....but it did the same thing.   So Im thinking its something to do=
 with
>the original cb conversion process.
>_______________________________________________
>Fox_Tango mailing list
>Fox_Tango@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/fox_tango



--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
---