[ForSale-Swap] Tri-Ex TM-358C Sky-Needle 58' Motorized Tubular Tower.

[Bill]

*Last Call!
*/Before I have it removed./*

Tri-Ex TM-358C Sky-Needle 58' Motorized Tubular Tower.*


58' Sky Needle. On blocks horizontal.
This is a very Heavy Well Constructed Galvanized Tubular Tower weighing 
in at 1100 pounds. Entire tower consists of the the Tower, all parts and 
all engineering drawings that came with tower originally. It has the 
Side Ladder that leads up to the Crows Nest. Tubular Tower is 3 
sections. The basic tower is quite sound. It nests at 23 feet. There 
will be probably some work needed in some areas. Motor turns freely by 
hand, but I am unable to run power to the storage area to check.

All Mechanical parts of tower look very good. Heavily Galvanized. All 
parts are included except for the base plate and cage. Stainless Steel 
Cable. Motor turns freely but has not had power to it in some time. 
Aside from the attached outside control box there is a Remote Control 
Box with power cable to bring into the shack.

The antenna load for this tower is 400 lbs! That is heavy duty. This was 
a top of the line Tower when constructed and it's design is still sold 
today by custom order.

Tashjian was the designer of this tower and has the info on the 
mechanics. He still makes the larger one on a special order basis Those 
who are familiar with the name "Sky Needle" already are aware of the quality

Tower is currently horizontal, on Cement blocks and Covered. I am 
located in Fort Lauderdale Fl. Pickup and Delivery will be needed. As is 
where is. Tower will need to be moved onto a dolly and rolled to front 
driveway(the same way it came in). And then loaded onto your delivery 
method of choice.

All Manuals, Engineering Information, Diagrams and Plans are Included.
It must be moved...
Bill W2CQ
bmarx at bellsouth.net