[ForSale-Swap] Many More items for Sale (mostly VHF / UHF) - Update

Bob Kocisko k6pf at sbcglobal.net
Thu Jul 14 19:43:27 EDT 2016


Tnx to so many of you, I've sold a lot of the items recently posted.  A few are still  for sale & some new ones added so here's an update:

1.  2m 8877 HPA.  W6PO design built by VE3KH.  Beautiful construction. Hv made many CW EME QSOs w/ this.  Easily puts out legal limit w/ 7-10 watts drive using the TE Systems 1410G driver listed below.  Just need a HVPS.  Mounted on a 12.25" H rack panel.  $1,075.  See the following 2 items that were used w/ this PA.

2.  TE Systems 1410-G for 2m.  Xlnt condx.  10 W Pin / 100 W Pout.  Will drive above 8877 HPA to legal limit pwr output.  With built-in preamp.  Includes manual & schematic.  $225.

3.  Spare 8877.  Medical pull tested new.  Includes test documentation.  Reduced to $375.  Note used 8877s hv SOLD on eBay between $350 - $550 for an avg price of $437.

Note:  If  items 1 thru 3 above are all purchased together, will work a discounted pkg price.  Don't want to split up pkg.

4  SSB LT70S linear transverter.  Bought as part of a working 70cm EME system which I never used.  432-434MHz w/ 28-30MHz IF.  Pwr output of 20W with internal adjustable drive of 0.1mW-500mW.  NF ~1.0dB w/ 20dB gain.  Requires 13.8VDC at 4.0A on xmit.  Xlnt condx.  Hv schematics & manuals in English & German.  $450 for just the LT70S.  Hv rack mounted (see pictures) for $85 additional if desired.

5.  Yaesu FC-20 automatic antenna tuner.  It covers 160 thru 6m & expands the SWR matching range.  Purchased as part of an estate.  Don't hv antennas up yet so never used it.  The FC-20 includes the interconnecting control cable & a coax jumper between it & a Yaesu FT-847 or FT-100/D.  It also has three N(f) connectors.  Condition of cabinet is abt an 8 out of 10 & installation instructions are included.  Three sold on eBay for $152.50, $185 & $195.  Asking $125.

6.  MFJ-264N dry dummy load.  Up to 1.5KW HF - UHF (1-650MHz) with N(f) connector.  Like new condition.  Includes chart on back of cabinet for pwr handling capability vs. xmit time.  9" x 3" x 3".  Asking $45 (HRO new is $85).

7. Linksys Wireless Ethernet Bridge (2.4 GHz, 802.11b).  Includes pwr supply.  Model WET 11.  Includes built-in antenna & single jack.   Purchased at a hamfest & never used.  Decided to go to 5GHz.  Looks like new condx.  $10.

8.  Datum Programmable Time System / Time Code Generator. Model 9700AT. Never used it. Powers up & completes self-check. Includes manual. Rack mounted 1.75" H x 19" W x 19" D. The 9700AT performs two basic functions.  It operates as a Time Code Generator (divided down to 1 pps which is further divided) using an internal 1 or 5 MHz oscillator, or optionally it operates as a Translator using a Serial Time Code as a time base (such as an external frequency input like GPS).    This code is typically a member of the IRIG family.  I planned on using it as a time readout (IRIG) for my Odetics GPS rcvr but then I found a different one.  Reduced to $75.

All other items previously advertised hv bn sold.  All prices are OBO + packing materials (unless I hv on hand), shipping & insurance fm 86323. Prefer local pickup in Chino Valley, AZ. Will deliver locally.  Pictures of every item are available on request. PayPal accepted.

Tnx for reading & vy 73,

Bob, K6PF




More information about the ForSale-Swap mailing list