[ForSale-Swap] Many More items for Sale (mostly VHF / UHF) - Another Update

[Bob Kocisko]

Tnx to so many of you, I've sold a lot of the items recently posted.  Sri for the BW but a few items are still  for sale (some prices reduced) & some new ones added as I continue to clean out my shack so here's an updated list:

1.  2m 8877 Hi Pwr Amp.  W6PO design built by VE3KH.  Beautiful construction. Hv made many CW EME QSOs w/ this.  Easily puts out legal limit w/ approx. 75+ watts drive.  Just need a HVPS.  Mounted on a 12.25" H rack panel.  Front panel is a 10 out of 10. Reduced to $1,025.  See the following  item which was used w/ this PA. This is a great 2m hi pwr amp in vy gud condx for EME, tropo or JT-65.   Socket pinout will be provided.  Needs an external low current +28VDC to control a PTT relay.  Lots of copies of articles for design, schematics & construction drawings included.

2.  TE Systems 1410G for 2m.  Xlnt condx.  10W in / 160W out.  Will drive above 8877 HPA to legal limit with abt 5+ watts input.  Has built-in preamp.  Includes manual & schematic.  Asking $225.  

Note:  If  items 1 & 2 above are all purchased together, will work a discounted pkg price.

3.  AILTech 75 Precision Noise Figure Indicator (PANFI).  Includes pwr cable & copy of Operations & Maintenance Manual.  Noise source not included but see #4 below.  Top & bottom of cabinet are perforated & in gud condx.  Front panel is abt a 9 out of 10. Powers up & with HP signal generator at 30MHz (-70dBm) into the IF, meter deflects ok.  Can rack mount if desired.  Weight is 38 lbs before packing to ship.  Asking $60.  

4.  Microwave Semiconductor Corp MSC Model 645 noise source which has a BNC(f) connector on one end & a SMA(f) on the other end.  No ENR or freq. markings on it & can't find any info Googling it.  Suspect it's a typical 15.5dB Excess Noise generator with a freq. range into the GHz due to SMA connector but not sure.  Asking $60 & will sell with the 75 noise figure meter above for a pkg price of $100.

5.  Astron RS-12M linear pwr supply in gud working order.  Has one meter w/ switch between V&I.  Regulated 13.8VDC with 9A cont. & 12A ICS.  Includes pwr cord, schematic & purchase receipt fm HRO for $97 in 8/2002.  New today fm HRO is $105.  In vy gud condx.  Asking $55.

7.  Astron VLS-35M linear pwr supply.  Regulated 5-32VDC fm front panel knob & current control on front panel calibrated fm 0-40A.  Two meters.  Spec'd at 35A ICS & 28VDC & 27A continuous duty.  This is primarily a 28VDC supply.  Max current is reduced to 15A at 12VDC & 8A at 5VDC per specs.  Weight ~50 lbs before packing.  Has fan.  Includes service manual, schematic, & pwr cord.  May need some TLC (not sure) since I don't hv means to check out hi current at 28VDC.  Do get correct V out.  Prefer to sell to someone in So Calif. (to reduce shipping chg) who can take it to Astron in Irvine, CA to hv them check it out.  Cost new is $379.95 fm HRO.  Reduced to $155.

8. GR Variac (Vintage adjustable xfmr) Type 100-R.  Rated at 230V @ 2 KVA (approx. 9A).  In vy gud condx with smooth rotation.  Was going to use w/ 4KV HVPS for EME amps but sold them.  Mounted on a grey 8.75" x 19" rack panel (handles on panel to be removed & holes plugged w/ SS screws).  Variac is 6 sided.  Side-side 5 ways measures 7" & side-side with terminals is 8".  Overall length is 9.5".  Prefer to sell w/ rack panel for $80 but will sell Variac only for $65.

9.  Linksys Wireless Ethernet Bridge (2.4 GHz, 802.11b).  Includes pwr supply.  Model WET 11.  Includes built-in antenna & single jack.   Purchased at a hamfest & never used.  Decided to go to 5GHz.  Looks like new condx.  Reduced to $8.

Will add more items as I clean out shack.  All prices are OBO + shipping & insurance fm 86323. Prefer local pickup in Chino Valley, AZ. Will deliver locally.  Pictures available upon request. PayPal accepted.

Tnx for reading & vy 73,

Bob, K6PF