[ForSale-Swap] [Boatanchors] Homebrew, SP-44, Van de Graaff, Echophone, C...

[WA5CAB--- via ForSale-Swap]

Further to Mike's post, you can easily determine whether it is for an 
AN/ARC-5 or for either ATA or SCR-274-N.  If the outer ring of pins in the 18-pin 
connector has a gap in it (pin missing), it is for MD-7/ARC-5.  If the gap 
is in the inner ring, it is for either of the other two.

Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480

In a message dated 09/14/2015 09:12:55 AM Central Daylight Time, 
boatanchors at mailman.qth.net writes: 
> Since I have no Arc-5 here, I am not sure about this one....this looks 
> like the 4 connectors from either an MD-7 modulator or from one of the 
> command set racks. So someone stripped the connectors out, left them wired 
> together and here they are. They are male connectors--with pins. And they have 
> the locking rings. There are 4 connectors in the bunch--one 3-pin, one 6-pin, 
> one 12-pin and one 18-pin. Maybe someone can use this set to bring back a 
> modified rack or modulator. $15 shipped to your door.