[ForSale-Swap] FS: Advanced Personal Scope APS230 Velleman

doc at kd4e.com doc at kd4e.com
Thu Jan 12 22:08:00 EST 2012


Velleman APS230 2 Channel Advanced Personal Handheld Oscilloscope

Excellent condition in original box with manual, etc.

Asking $375. including shipping standard USA (some locations and
Canada may be extra).

Advanced personal oscilloscope APS230 has 240MS/s sampling rate and 2x 
30MHz analog bandwidth. This advanced 2 channel oscilloscope has a high 
contrast LCD display (white background with black signal traces and text 
readings) just like those found on much more expensive professional 
oscilloscopes!  Not a kit, this oscilloscope is ready to use right out 
of the box.

The APS230 Oscilloscope is a giant step upward in performance value! 
APS230 defines an Advanced Personal Scope. Finally, an affordable 
handheld oscilloscope with two (2) input channels and enough bandwidth 
(2 x 30MHz) to be very versatile. Package includes everything you need: 
2 oscilloscope probes, serial cable for PC communications, user manual, 
AC to DC power adapter, and a rechargeable battery pack!

Features

     oscilloscope APS230 has handheld portability!
     2 input channels
     high contrast LCD with white backlight
     full auto set-up for volt/div and time/div
     recorder roll mode, up to 170h per screen
     trigger mode: run - normal - once - roll ...
     adjustable trigger level and slope
     peak measurements: max, min. and pk to pk
     measurements: rms, dB(rel), dBV, dBm and dBG
     Direct Audio power measurements
     x1 and x10 probe calculation option
     several display modes
     StereoScope mode for audio measurement
     X and Y position shift
     Firmware upgradable through internet

Specifications
Maximum sample rate  ............................... 	2x 240MS/s for 
repetitive signals ( 2x 60MS/s for single shot events)
Maximum input amplifier bandwidth ............ 	30MHz per channel 
(except 1mV and 2mV boost range)
Input impedance  ....................................... 	1Mohm // 20pF 
(standard oscilloscope probe)
Maximum input voltage  ............................. 	100Vpeak (AC + 
DC), 200Vpeak-peak (AC only)
Input coupling  ........................................... 	DC, AC and 
GND    (GND for auto zero reference)
Vertical resolution  ..................................... 	8 bit ± 1bit 
linearity
Trigger modes ........................................... 	Run, Normal, 
Once, Roll mode for 10s/div and slower timebase
Trigger level .............................................. 	Adjustable 
with positive or negative slope selection
LCD Graphics  ........................................... 	128 x 192 
pixels with WHITE LED backlight
Screen markers  ........................................ 	Step markers 
for voltage, time, ...
Signal storage  .......................................... 	256 samples 
per channel, 2047 in roll mode
dBm measurement (0dBm= 0.775V)  ......... 	From –80dB tot +40dB (up to 
60dB with X10 probe) ±0.5dB accuracy
dBV measurements (0dBV= 1V) ................ 	From -78dB tot +38dB (up 
to 58dB with X10 probe) ±0.5dB accuracy
True-rms measurement  ............................ 	From 0.03mV to 80V 
(up to 400Vrms with X10 probe) 2.5% accuracy
Timebase range in 35 steps  ..................... 	25ns to 1hour/division
Sensitivity  ................................................. 	minimum 30µV
Input sensitivity range in 14 steps  ............ 	1mV to 20V/division 
at X1 - 10mV to 200V/div at X10
Probe calibration output  ........................... 	1,2KHz / 3Vpp
Supply voltage .......................................... 	9VDC/ 600mA 
regulated international power adapter (included)
Batteries ................................................. 	6V / 1800mA 
battery pack NiMH rechargeable
Charge current for rechargeable batteries.. 	400mA fast charge
Battery current (average)  ......................... 	On: 350mA, with 
backlight: 400mA, standby current: < 100µA
Operating temperature  ............................. 	0 to 50°C (32 to 
122°F)
Physical characteristics ............................ 	Dim: 230x150x50mm 
(9x5.9x1.97") Weight: 830g incl. Batteries
RS232 serial communication with PC  ...... 	Internal optical isolated 
RS232, 57600bd for screen and data load/set
Firmware  ................................................. 	Upgradeable 
through internet
Protection  ................................................ 	IEC1010, 
600V CATII, pollution degree 1 (IP40)
Oscilloscope dimensions  ......................... 	9.1" x 5.9" x 2.0" 
   (23.1cm x 14.9cm x 5.08cm)
Unit weight ................................................ 	30oz. 
including battery pack.  (0.85kg)
Package Includes

     APS230 oscilloscope unit
     RS232 cable (9 pin sub-D)
     2 insulated 60MHz (1x or x10 selectable) oscilloscope probes
     User Manual
     International power adapter (110Vac 60Hz / 230Vac 50Hz) to 9VDC
     Includes one rechargeable battery pack

<http://www.mcmelectronics.com/product/VELLEMAN-SA-APS230-/72-8670>




-- 

Thanks! & 73, KD4E
David Colburn http://kd4e.com
Have an http://ultrafidian.com day
I don't google I SEARCH! http://yippy.com
Shop Freedom-Friendly http://kd4e.com/of.html


More information about the ForSale-Swap mailing list