[ForSale-Swap] Re: Swap BA Station & Homebrew Parts - More Added

[kd4e]

I'd like to swap everything listed below for a
Yaesu FT-747gx or equivalent.  Needs to be
reliable but doesn't have to be cosmetically
perfect.

Local swap in Tampa-Orlando-Ocala area.

FOUND MORE STUFF TO ADD TO THE PACKAGE:

GE DC-DC Converter  PL19C304106G3
Outputs: 744vdc, 330vdc, 51vdc
I believe it is new old stock.

Commercial/Industrial Grade & Size Tubes (nos):

6960 (= TBW7/8000) RF heating VHF triode [55w IN 6,000w OUT]
http://www.wps.com/archives/tube-datasheets/Datasheets/Amperex-CC-363/10.JPG

(3 ea) 6587 Thyratron (they are a 5C22 in a 4C35 package)
http://www.tesla-coil.com/Thyratron.htm
http://datasheets.electron-tube.net/sheets52.html

8013 High-vacuum Rectifier (no box)
http://datasheets.electron-tube.net/sheets8.html

EL6B/L Half-Wave Rectifier
http://datasheets.electron-tube.net/sheetsE2.html

> (Great collection of stuff for a new Ham or one interested
> in boatanchor cosmetic restoration and homebrewing - or
> who wants lots 'O stuff to sell at Orlando.)
>
> 1. Multi-Elmac AF-68 Mobile HF Transmitter (tested good)
> 2. Multi-Elmac PMR-8 Mobile HF Receiver (tested good)
> 3. Transformers, schematic, and circuit desc. to build a
> homebrew PS for the Multi-Elmac station.
> 4. Power & inter-connect cables for Multi-Elmac station.
> 5. GONSET 3222/G-33 Receiver (this is a project rig)
> 6. Astatic 10-C chrome & gray bullet mic w/cable adapter
> 7. Monarch MC-131 Desk Mic w/stand (bullet-type like 10-C)
> 8. A box filled with air variables, roller inductors, and
> other components.
> 9. A big box filled with tubes, assorted sections of
> sub-chassis with some neat parts and hardware.
> 10. Small Heathkit signal generator (untested)
> 11. HAMEG 20MHz Scope HM-205-2 (appears OK, no docs or probes)
> 12. MFJ 984 Versa Tuner II (needs cleanup and meter circuit repair,
> I will include replacement ceramic standoffs and the parts
> to improve 160M & 80M performance). This is essentially
> the Dentron MT-3000A.
> 13. An old AM-BC receiver, an empty tabletop cabinet, and a
> classic toy AM-BC transmitter. Also, a Crosby console
> cabinet w/a speaker and the dial/mechanism.
> 14. An old TV antenna rotor (a rough and untested project)
> 15. A clear plastic set of three drawers I have used for
> $0.25 and $1.00 items for sale at Fests. (Lots 'o stuff
> in those drawers as well.)

-- 

Thanks! & 73, doc, KD4E
Sent Using: ChurchPup-Linux
http://www.churchpup.com/
Personal: http://bibleseven.com/kd4e.html
             |_|___|_|
             | | & | |
                {|
        /\      {|
       /  \     {|
      /    \    {|
     /   @  \   {|
     |   |~_|~~~~|
     |   -| |    |
============\ # KD4E