[ForSale-Swap] Keithley 610C Solid State Electrometer

[Bonddaleena at aol.com]

Hello, I have the following piece of test equipment that is surplus to my  
needs.
 
I knew the Lab this came from, and I doubt if it was EVER used...
It is a Keithley Model 610C Solid State Electrometer.
 
This is an incredibly sensitive meter. It has an RS-232 connector.
 
It is typically used in the design of copiers and has the ability to  measure 
the electrostatic charge on a piece of paper.
 
Here's some of the specs:
 
Volts:            .001  to 100 Volts
Amps:            down  to 10 to the -11th
Ohms:            up  to 10 to the 12th
Coulombs:        down to 10 to the  -10th
 
I have no need for this Lab grade instrument. I have 30 or so VTVMs and a  
ton of other test equip. I was offered a nice sum by some Lab equipment  
suppliers, but I'd really like to swap it for a NICE HP 8740 . I would also be  
interested in a nice high end receiver, since I also collect those. I have  several 
dozen HP SGs but they are all tube type and getting long in the  tooth.
 
thanks in advance!!!
 
 
ron
 
N4UE
 
North Florida