[ForSale-Swap] RF Parts FS

[DAVID AABYE]

The following items are still availabe, some reduced. 
Add your choice of shipping by UPS or Priority Mail.
> 
> Johnson edge wound inductor. Model number on the tag
> is 200-118-2. 85 uH (measured), 42 turns of 1/4-inch
> plated ribbbon, 5.5 inch diameter, with tap hardware
> and strap. This is a real beauty, probably best used
> in a serious antenna matching network. $35.
> 
> Johnson HV variable caps. The stickers are worn
> (typical), so I can't provide the model numbers. 
> Each is approx 4x4x8 inches overall. One has 11
> rotor and 10 stator plates. The second has 10 rotor
 and 10 stator plates. Both are 1/4-in spacing.
> $15 for the pair.
> 
> National HV variable cap. (no type number
> identified).  Approx 6x5x4 inches overall. 8 rotor
and 7 stator plates. 1/4-inch spacing. $5.00
> > 
> Variable cap, manufacturer unknown. Might be the
ideal loading capacitor for a H.B.amplfier project. A
nice quality unit with 5 sections, each section 14 to
400 pf (70 to 2000 pf total). 6x4x3 inches overall.
$20
> 
> I'd like to ship as one lot.  If someone takes it
all for %50, I'll throw in a couple of addtional
variables to empty the parts box.
> 
> Thanks for looking,
> 
> Dave, W4QCU
> Oak Ridge, TN
>