[ForSale-Swap] PARTS FOR HEATHKIT SB-101 [and others] - UPDATE

[joseph lutz]

Sorry for no reply to the various emails - was waiting from a chap 
to get back to me re: the lot, but both him and I got the flu bug!!
Anyway, he decided he didn't need all the parts, so the parts are
again available.  I have came across [2] Heathkit hand mikes [1 with
and 1 without the 'H' disc in the center], also 3 more boards that I 
had sent to a chap that needed some coils - he took what he needed
and sent me back the boards. A couple of the coils are broken, but 
the majority of them that are there are still in one piece. I have 
added both the mikes and the 3 boards to the lot.

  There has been a number of queries for one or two items, and
although I would like to do the lot, as I have no idea what to ask
for [1] choke, or anode clips, etc. Also, the 407-741 is a NEW 
Never installed Forward Power Meter.  And that manual is for the
HM-2140-A.  
> > Getting ready to work on disposing of the Heathkits I have on site 
> > and first to go is a bunch of parts that I have accumulated over the 
> > years.  I was started taking off all the 'additional' components that 
> > were added to the individual boards, but no longer have the time - 
> > Following is a list of most of the parts that I would like to sell in 
> > one lot: 
> > 
> > HEATH PN DISCRIPTION 
> > - - - - - - - - - - - - - - - - - - 
> > 26-24 20 pf  variable capacitor - attached to lug 1 
> > of 26-77 w/12 pc mica cap 
> > 26-77 250 pf variable capacitor - attached to cap 
> > bracket 
> > 26-92 3-section variable capacitor 
> > 40-548 Final tank coil w/40-549 coil attached - not 
> > the one listed below.  Tank coil has the fiber 
> > stand-off posts 
> > 40-549 10-meter coil - attached to lug 1 of cap 
> > 26-77 
> > 45-41 425 uH Choke [w/45-53 below attached] 
> > 45-53 [2 each] Parasitic chokes - with anode clips & caps 
> > 85-127-1 Modulator Circuit Board - all components 
> > seem to be there except for crystal 
> > Y3 [3395.4 Khz] not there. 
> > 85-128-2 IF Circuit Board - all components seem to 
> > be there 
> > 85-129-2 Bandpass Circuit Board - all components 
> > seem to be there [except of course, tubes] - 
> > also has a 100 kHz crystal [404-43] 
> > 85-130P224 Audio Circuit Board - output xfmr there 
> > with one end loose, all other components 
> > appear there - the 20 ufd electrolytic has 
> > one end broken off. 
> > 85-131-2 RF-Driver Circuit Board - all components 
> > seem to be there [again, except for tubes] 
> > 85-133-1 Heterodyne oscillator board - has all coils 
> > 85-133-2 Driver grid board - has all coils 
> > 85-133-3 Driver plate board - has all coils 
> > 404-43 100 kHz Crystal  [in addition to one above] 
> > 
> > Also have a chassis for a SB-101 that has: 40-548 [Final tank coil]; 
> > 26-92 [3-section variable capacitor]; 45-41 [425 uH choke] w/only 
> > [1] 45-53 parasitic choke & anode clip; [2] 8-pin tube sockets; [1] 
> > relay socket; assorted rf chokes, slide switch, etc - underneath.  Also 
> > have slide switch assemblies, tuning shafts and other misc from a 
> > SB-101 or? 
> > 
> > One last item that I will include with this lot is: 
> > 
> > [1] 407-741 Forward Power Meter - f/u/w the HM-2140-A 
> > HF Dual Wattmeter.  NOS [In original pkg] 
> > I will include a copy of the Heathkit Manual. 
> > 
> > 
> > Total for above:  $55.00 + Shipping 
> > 73, 
> > Joe W7LPF [WPA] 
> > 
> > 
> > "You only need two tools.  WD-40 and duct tape.  If it doesn't move 
> >   and should, use the WD-40.  If it moves and shouldn't, use the 
> >   duct tape." 
> > 
> > All messages and attachments scanned by Norton AntiVirus Auto 
> >                               checker prior to being sent. 
> >