[ForSale-Swap] TenTec Pegasus 160 thru 10 m xcvr FS

[Ken Simpson, W8EK]

For Sale:

Ten-Tec Pegasus Model 550 HF transceiver

Covers 160 thru 10 meters, although it can be used
with a transverter for 6 and 2 meters, and will display
the 6 or 2 meter frequency on the screen.

It will transceive SSB, CW, FM, or AFSK, and receive 
AM.  Of course it is also ideal for digital modes such 
as PSK31, pactor, etc.  It has 2 VFOs and 1000s of
Memories, and full break-in on CW.

This rig is very close to a "software definable" rig, in 
that most of the rig is controlled from the computer and 
computer program. There are no knobs on the rig.
Everything is on the computer screen.  It makes for
a rig that can be changed by changing the software.
DSP filtering is provided, that is quite effective, so
no crystal filters are needed.  Bandwidths go from
300 Hz to 8 KHz, with 1.5 to 1 shape factors, or better.

This particular unit is in excellent condition, with latest 
firmware. It looks and performs almost like new.  No 
scratches, dents, or dings.  TenTec operating control 
software is included in both 16 bit and 32 bit operating 
systems, so you can use an older version of Windows 
or the latest version.  Of course it has the power cord 
and complete manual with it.  It needs 13 V DC at 
about 20 amps to operate.  In its original box for $625

Other TenTec items:

TenTec 705 desk microphone
This electret desk mic has the 4 pin connector,
with PTT and "hold" buttons.  It works great, and
looks like new.  With paper work for $75

TenTec 255 Deluxe Power Supply
Matches the early Omni series, and includes ammeter
and speaker, and trim ring. Dual pass transistors similar
to the heavy duty 280 power supply. Good for 20 amps
at 13 V DC. This one looks fine, and works the same. 
With manual for $ 145.

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at speakeasy.net or W8EK at arrl.net
Voice Phone  (352) 732-8400