[ForSale-Swap] FS: Potentiometers & Power Resistors

[marv_e_ads at juno.com]

***** Resistors *****

 --- Used ---

8.5 ohm Clarostat 20 watt? pot, 1-1/2" dia. 3/8" bushing, 1/4" dia shaft 1/2" long - $10

10 ohm, 100 ohm, 1K ohm -- Clarostat 58C1, 3W pots, S taper -- $5 ea.

60 ohm Ward Leonard 20 watt?, 2 terminal rheostat, 1-1/2" dia. 3/8" bushing, screw adj. - $10

65 ohm Ohmite Type J pot, 50 watt, 2-1/4" dia., 3/8" bushing, 1/4" dia shaft 1/2" long - $15
 
1.5K Two 200W (or so -- 10" long) 1.5K ohm 10 tap (every 150 ohms) power
resistors.  $10 pair
 
1.5K Dale, 225 Watt power resistors.  3 pieces -- $10 all
 
2K Ohmite, 225 Watt power resistors w/mounting clips -- $4 ea (10
available)
 
3K Ohmite, 225 Watt power resistors w/mounting clips -- $4 ea (8
available)

3.5K ohm, Ohmite Type H pot, 25 watt, 1-9/16" dia., 3/8" bushing, 1/4" dia shaft 1/2" long - $10

37.5K 78W power resistors, Four w/mounting clips -- $8 all

500K ohm Carter Radio rheostat with 2" diameter skirted knob, calibrated
0-100 over 270 degrees -- $5

 --- Carborundum type SP resistors  $10 each ---

30 watt parts (2.5" long)   75 ohms

100 watt parts (6" long)   1 ohm   30 ohms(2)  240 ohms  270 ohms

125 watt parts (8" long)   35 ohms(2)  220 ohms(3)  250 ohms

  The numbers have partially worn off some of these units so, some of the
above numbers are measured values.


--- 125+ used Potentiometers ---

 Good assortment from 10 ohms to 2.5M.   50 or so Allen-Bradley Type J's, mostly 3/8" bushings with approx. 1/2" long, 1/4" dia. shafts on the rotary parts, a few are longer.  A few duals, a few with switches, perhaps 25 trimmers, mostly metal cased except for about 15 sliders. A few appear to be unused.  $50 all.


--- Potentiometers NOS, linear taper unless otherwise noted ---

25 ohms, Clarostat 3/4" diameter metal cased PC mount trimmer.  $2 ea.

50 ohms, Clarostat 3/4" diameter metal cased PC mount trimmer.  $2 ea.

75 ohms, .58 amps, Ohmite LH, 1.5" dia., 3/8" bushing, 1/2" long 1/4" shaft.  $10

100 ohms, Clarostat 3/4" diameter metal cased PC mount trimmer.  $2 (one only)

100 ohms, Clovern CLR2239/22S, 1-5/8" dia., 3/8" bushing, 1" long 1/4" dia. shaft -- $5

500 ohms, 25W, Dejur, 1.75" dia. 3/8" bushing, 5/8" long 1/4" dia. shaft.  $10

1K ohms, .9" dia., 3/8" bushing, 1-1/2" long 1/4" shaft.  $2 ea

7.5K ohms, .9" dia., horizontal PC mount trimmers.  $1 ea

10K Bourns 3862C, 1/2" dia., 1/4" bushing trimmers.  $2 ea

10K ohms, .9" dia., 3/8" bushing, 3/4" long 1/4" plastic shaft which also pulls to operate rear mounted DPDT switch.  $5 ea

15K Alps audio taper, 5/8" dia., .43" bushing, 3/4" long 3/16" shaft, w/3A switch.  $4 ea

15K Ohmite Type E 7/8" dia., 10 watt, 1/4" bushing screw adj.  $10

250K CTS Vertical PC mount trimmers -- 4/$1

20M (5W?) IRC Type 69 2" dia., 3/8" bushing, 1/2" long 1/4" shaft, 2 available -- $10 ea.

			--- and --- 

         a large NOS Allen-Bradley Type J assortment

Values from 50 ohms to 1000 Meghoms.  Mostly linear taper, some log & audio, a few reverse log.  Mostly 1/2" shafts, a few are longer.  A few duals, pads, dual concentric, triples, & some with switches.  Typically 5-10 pieces of each value, with a few single exemplars.

Approximately 150 different types / over 1000 pieces total.  $2500




All of the above plus shipping, if necessary, naturally.
 
Contact:  Marv  WC6W   310 649 3111 (reasonable hours Pacific Time
please) 
 
 
 
 
 
*


___________________________________________________________________
Speed up your surfing with Juno SpeedBand.
Now includes pop-up blocker!
Only $14.95/month -visit http://www.juno.com/surf to sign up today!