[ForSale-Swap] Coax connectors, heat sinks, toroid transformers

[Lloyd]

1.  Coax connectors, chassis mount BNC. No hardware, require nut and washer.
New. 3 for $1.00 plus shipping

2 Heat sinks 2.35" wide x 4.80" x.925 high. $1.00 each plus shipping

3 Toroid transformer. Leads have been cut but are long enough to connect to.
Pri 117 vac
Sec #1 15.9-0-15.9 @ 2 amps (31.8 vac ct)
7.5 vac @ .75 amps
12.0-0-12.0 vac @ 3.5 amps  (24 vac ct)
That figures out about 153 watts.
4.25" dia x 2." thick, center hole 1.9"
Remove part or all the secondary and wind your own.
Wt 4.2 lbs

4. Toroid transformers, 120 vac primary, 18 vac secondary. they are 3" dia x
1.25" high. The 18 volt winding could be removed or ignored and a few turns
of new wire put on to get 2 volts or so. There is plenty of room on the core
to add the windings. 18 vac x 3 amps = 54 watts, based on this, reduced to 6
vac, 54 watts you could develop 9 amps using heavier wire naturally. Hope I
am right on this. If the 18 volt winding was partially removed, a center tap
could be developed and part of the wire put back on to make 12 v ct, or any
other voltage your needs required.
They weigh 1.27 lbs each.
Price $4.00 each plus shipping.

Pix on request
Please visit my web pages
http://www.lloydsdipsydumpster.com/

Lloyd Godsey  KK7IZ
1315 N. Udall Circle
Mesa, Az  85203

1-480-620-7145 (cell)

kk7iz at cox.net
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.591 / Virus Database: 374 - Release Date: 2/17/04