[ForSale-Swap] Low Pass TVI filters FS

[Ken Simpson, W8EK]

TVI filters for the transmitter For Sale:

Drake TV-1000-LP
Low pass filter for the transmitter
This is the filter that may also be used on the low
end of six meters, as well as HF.  It is good for 1000 W
below 30 MHz, and about 200 W up to 52 MHz.  This 
particular filter looks very nice. The copper is fairly 
bright and shinny.  $ 35

B & W  TVI filter, model  FL 10 / 1500 (also known as
model 425). Translated, this means that it cuts off just
above 10 meters, and will handle 1500 Watts. SO-239
connector on each end.  $ 30

B & W  TVI filter, model  415
I have not been able to find specs on this model, but it says
right on it that it is for 52 ohm systems.  It looks like it will
easily handle 1500 Watts. SO-239 connector on each end.
Good shape.    $ 30

TVI filter, made by Communications Power, Inc in the USA.
This appears to be a bandpass filter for use on 10 (or 11)
meters, and is rated at 600 watts. It has provisions for tuning
the input and output for maximum TVI reduction. SO-239
connector on each end.  $ 30 

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at fdt.net or W8EK at arrl.net
Voice Phone  (352) 732-8400