[ForSale-Swap] FS: Variable & Fixed capacitors

[marv_e_ads at juno.com]

*********** Air Variable Capacitors ********
 
Cardwell enclosed 7 section variable capacitor assembly for/from some
receiver? -- The sections measure: 210, 210, 105, 105, 105, 100 & 75 pF. 
The unit is about 12" long and 3" square with a right angle drive mounted
in the center and a 30 turn scale.  This looks to be NOS (nothing ever
soldered to...) but, it is a mite tarnished on the outside from being
stored forever.  There is also a (Mil?) number on the unit:  SC3188A. $30
See at:
http://photos.yahoo.com/bc/marv_email/vwp?.dir=/Jpegs&.dnm=cardwell.jpg&.
src=ph&.view=t
 
Johnson T9-5 miniature vertical PC mount trimmers 1.9-15.7 pF, Silver
Plated machined plates -- NOS  2/$1
 
G.I. Corp 70 pF, .080" air spacing, about 3.5"x3.5"x3" overall, ¼" shaft
$2ea (2 available)
 
National Type DX 500pF variable capacitors, approx. 3" X 3" x 3" overall
fairly good condition.  $10 ea.  May be seen at:
http://photos.yahoo.com/bc/marv_email/vwp?.dir=/Jpegs&.dnm=National.jpg&.
src=ph&.view=t&.hires=t
 
Remler "scissors" variables.  Type 630  350pF  $25
                        Type 631  500pF  $25
 
General Instrument type NNC153 3 Section large receiving style capacitor
13-420 pF per section, $15
 
4 Section capacitor 20-550 pF section large receiving style capacitor,
$25
 
See the previous two units at:
http://photos.yahoo.com/bc/marv_email/vwp?.dir=/Jpegs&.dnm=loadcaps.jpg&.
src=ph&.view=t&.hires=t
 
See the next four units at:
http://photos.yahoo.com/bc/marv_email/vwp?.dir=/Jpegs&.dnm=aircaps.jpg&.s
rc=ph&.view=t&.hires=t
 
Johnson 154-1,  12-244pF,  .05" air gap, about 3" x 3" x 3" overall. 
Rear shaft has been cut flush with bushing and the rear mounting tab has
been shortened a mite.  Otherwise, excellent condition, $25.
 
Johnson 154-34-3,  20-400pF, looks like .03" air gap, about 3" x 3" x 3"
overall not including 1/4" shaft which is about 2-1/2" long.  Excellent
condition, $25.
 
Johnson 500E20  (modern equivalent 154-3), 500pF/2KV, looks like .05" air
gap, about 3" x 3" x 4.5" overall not including 1/4" shaft which is about
1-1/2" long.  Good condition except the rear mounting tab has been
removed and it looks like a couple of the plates arced at one time and
were subsequently filed down a mite.  $25.
 
Similar to the part above but, NOT a Johnson, another 500pF/2KV, looks
like .05" air gap, about 3" x 3" x 4.5" overall not including 1/4" shaft
which is about 1-1/2" long.  Good condition except the front mounting tab
has been removed.  $25.
 
See the previous four units at:
http://photos.yahoo.com/bc/marv_email/vwp?.dir=/Jpegs&.dnm=aircaps.jpg&.s
rc=ph&.view=t&.hires=t
 
Hammarlund SM-50-X, 7.5-50pF, .064 air gap, Just under 2" x 2" x 2"
overall not including 1/4" shaft.  Good condition.  $10.  
 
National SEU-15, 15pF 270 degree rotation, straight line frequency,
variable cap.  Shiny and new in beaten-up old box  (SNIBOB)  $25.
 
 
**** Ceramic Doorknob & Disk caps ***

  These are used Centralab or similar -- $5 ea or 5/$20

  500pF  10KV   "TV" style  
   68pF   5KV   850 series   

-------
  These are NOS disks by KD & Erie  $3ea or 4/$10

  1500pF 7.5KV
  .01uF    4KV

------
  And a couple NOS Silver Mica caps.  

  2200 pF  500V  CM06 $1 ea
  5100 pF  500V  CM07 (high current rating)  $2 ea


All of the above plus shipping, if necessary, naturally.

Contact:  Marv  WC6W   310 649 3111 (reasonable hours Pacific Time
please) 
or via:  Marv_E_Ads at Juno.com


*

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.