[ForSale-Swap] Need small 3.5 MHz crystal

[Philip B Atchley]

Hello.
I need a small 3.500MHz Crystal to replace the 4.00 Xtal in my Homebrew
Longwave converter (converts 0-500kHz to 3.5-4.0MHz).  I want to change
to a 3.5 3.5MHz Xtal as the converter presently tunes "backwards" down
from 4.0MHz. The Xtal I'm using is the usual small size of about 1/2 x
3/8 inches with solder leads, but I could use either solder-in or plug
in.
  
Yes, I have several 3.579545MHz Xtals removed from old VCR's, but they
would "offset" my actual frequency by almost 80kHz and I need to be able
to read frequency much closer than that. 

  I can probably swap you a 4.00, 5.0, 15.0, 16.0, 7.200, 14.31818,
10.240, 3.5795 MHz (ALL solder in) or other Xtal for it. Otherwise, Cost
is a limiting factor here as there is about no budget for this project.  
  
73 de Phil  KO6BB
Loving home provided for wayward Boatanchor Receivers
ko6bb at juno.com
Merced, Central California
37.18N  120.29W  CM97sh

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.