[FlexNet] FlexNet32 + SoundModem problem ...

[Pavel Lajsner]

Hi all,

I'm happy that this problem finally appears here ..

Paxon (or any kind of terminal program) is not a problem here (I'm always
using it, simply looking&great soft anyway). This is layer 2 driver
(FlexNet) or somewhere nearby issue, not the problem of application
(terminal) itself.

The strange thing is that soundmodem config diagnostics works OK but after
FlexNet is loaded, the configuration is screwed up (even on the same machine
where it worked all OK with the same version of Win).

Since I haven't resolved this problem on any of disturbed machines,
unfortunately I'm using TNC-2 with DF9IC modem ;-((

73! Pavel ok2ucx (at) qsl.net


-----Original Message-----
From: flexnet-admin (at) mailman.qth.net [mailto:flexnet-admin (at)
mailman.qth.net]On Behalf Of Slavicek Michal
Sent: Monday, May 13, 2002 6:41 AM
To: flexnet (at) mailman.qth.net
Subject: RE: [FlexNet] FlexNet32 + SoundModem problem ...


Hi Pavel,
you haven't write, which packet program you use. Some of them don't work
with with Flex32 under win9x. Also the driver for Baycom - there is no
Baycom driver for this version. Read careful the instalation manual of
Flexnet and packet program. Try use for example Paxon.
73! Michal

-----Original Message-----
From: Xavier Romain [mailto:xavier.romain (at) sis.be]
Sent: Saturday, May 11, 2002 11:32 PM
To: flexnet (at) mailman.qth.net
Subject: Re: [FlexNet] FlexNet32 + SoundModem problem ...


I've the same problem ... Did you have a solution ?

Thanks ...
73's.
----- Original Message -----
From: "Pavel Lajsner" <Pavel.Lajsner (at) motorola.com>
To: <FlexNet (at) mailman.qth.net>
Sent: Tuesday, January 08, 2002 18:20
Subject: [FlexNet] FlexNet32 + SoundModem problem ...


> Hi FlexNeteers,
>
> I've been trapped into following problem:
>
> two months ago I've successfully setup FlexNet 32 ver. 2.1 with latest
> SoundModem (dated 09/2001). Also older SoundModem (dated 08/2000) worked
OK.
> Both 1k2 and 9k6 installations worked well on my Dell CPiA Win2k
notebook.
> The only feature which I was not able to use was the PTT keying thourgh
COM
> port so I used VOX circuit instead (which is even better, the COM port
> remained free). The later versions of FlexNet (2.2, 2.3) suffered from
the
> problem mentioned below.
>
> Recently I tried to run the same configuration on other different
machines
> (Win98/Win2k - notebook/desktop) but following problem appeared in any
> configuration/version of both FlexNet/32 and SoundModem. Receive is OK.
> After first TX packet is sent out, FlexNet keeps sending some "packet"
> periodically (approx. every 1.5 s, not shown in Trace window though)
until
> FlexNet is shut down. The next packet is sent, next periodical sequence
with
> the same periodicity is started. If many (e.g. SABM) packets are sent,
the
> TX output remains almost all time active.
>
> Thus I started to play with configuration/versions on my Dell machine
I've
> ended up with the same trouble. Even worse, when trying to use older
> SoundModem (08/2000) it cannot be properly registered in Parameters
window
> of FlexNet32 (an exclamation mark is above the soundmodem record).
>
> I tried to delete all registry entries before, no help. I'm screwed up
and
> can't figure what's the issue here.
>
> Anyone experienced the same trouble?
>
> 73! Pavel ok2ucx (at) qsl.net
>
> P.S. The soundmodemconfig's Diagnostics works properly in all cases/all
> machines/all versions.

_______________________________________________
FlexNet mailing list
FlexNet (at) mailman.qth.net
http://mailman.qth.net/mailman/listinfo/flexnet
_______________________________________________
FlexNet mailing list
FlexNet (at) mailman.qth.net
http://mailman.qth.net/mailman/listinfo/flexnet