[FlexNet] RMNC help
STEPHEN C J BUNTING
[email protected]
Wed, 10 Jul 2002 15:22:35 +0100 (BST)
Hi all,
Thanks to everyone for the kind replies to my request for RMNC help. I
think I replieed to everyone, but if I missed anyone, I have saved all
the messages and I may be in touch for hints yet.
Now I have some information from the french websites I can start to look
into getting the system up and running, but I am moving house next
month so it may take a while :-(
73 for now=20
Steve
M0BPQ
-------------------------------------------------------------------
Dr Steve Bunting
Neural Damage and Repair,=09=09Tel 0207 848 6268
Neuroscience Research Centre,=09=09
King's College London
Hodgkin Building=09=09=[email protected]
Guys Campus
London Bridge
London
SE1 1UL
--------------------------------------------------------------------
On Sat, 6 Jul 2002 [email protected] wrote:
> Send FlexNet mailing list submissions to
> =[email protected]
>=20
> To subscribe or unsubscribe via the World Wide Web, visit
> =09http://mailman.qth.net/mailman/listinfo/flexnet
> or, via email, send a message with subject or body 'help' to
> =[email protected]
>=20
> You can reach the person managing the list at
> =[email protected]
>=20
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of FlexNet digest..."
>=20
>=20
> Today's Topics:
>=20
> 1. Re: RMNC help ([email protected])
> 2. AW: [FlexNet] RMNC help (Missler, Jean Luc)
> 3. Re: RMNC help (F5GVH)
> 4. Re: RMNC help ([email protected])
> 5. Re: RMNC help (Tom Howarth)
>=20
> --__--__--
>=20
> Message: 1
> To: [email protected]
> Subject: Re: [FlexNet] RMNC help
> Date: Fri, 05 Jul 2002 10:50:42 +0200 (MEST)
> From: [email protected]
> Reply-To: [email protected]
>=20
> En r=E9ponse =E0 STEPHEN C J BUNTING <[email protected]>:
>=20
> Hello Stephen,
> I am sysop of two RMNC3 nodes in France (Chartres 28) and we are working =
to put=20
> a third one on the air.
> I have available english / french texts about the software RMNC/Flexnet w=
hich=20
> is very close to the PC/Flexnet version and the last compiler V3.3H.
>=20
> For the hardware I had to enter in the schemes, to test them and to disco=
ver=20
> the right meaning of the jumpers, pins and switches.
> Now it is clear for me.
>=20
> I will be very pleased to assist you if you want. The RMNC platform is=20
> extremely robust.
>=20
> 73, de Xavier, F6FKQ
>=20
> --__--__--
>=20
> Message: 2
> From: "Missler, Jean Luc" <[email protected]>
> To: "'[email protected]'" <[email protected]>
> Subject: AW: [FlexNet] RMNC help
> Date: Fri, 5 Jul 2002 12:06:00 +0200=20
> Reply-To: [email protected]
>=20
> Hello Stephen,
> so far I know, F5PJE has translated some docs.
> try this adress:
> http://wwwusers.imaginet.fr/~ferracci/flexnet/english/docs.html
>=20
> I also translated some more recent docs in French for about 1 1/2 Year,
> Maybe there are still in some good PR-Mailboxes ..
>=20
> 73s de Jean-Luc F1ULQ
>=20
> -----Urspr=3DFCngliche Nachricht-----
> Von: STEPHEN C J BUNTING [mailto:[email protected]]
> Gesendet am: Donnerstag, 4. Juli 2002 17:17
> An: [email protected]
> Betreff: [FlexNet] RMNC help
>=20
> Hi all,
>=20
> I have just inherited an RMNC node. It is out of service at the moment,
> and only have a little information on the system and that is in
> german. Can anyone a) point me towards to full info for the RMNC
> hardware (in Englifh or French... I dont speak German) and b) help me
> get it going... i.e. be willing to exchange emails with me every month
> or so as I try to get the node back on the air. Point b is a lot to =3D
> ask,
> but without any info I don't know where to start !
>=20
> As far as I know there is only one RMNC node active in the UK at the
> moment and I can't get hold of the sysop so I am turning to you guys
> (and gals)
> 73
> Steve
> M0BPQ
> -------------------------------------------------------------------
> Steve Bunting
> Neural Damage and Repair,=09=09Tel 0207 848 6268
> Neuroscience Research Centre,=09=3D09
> King's College London
> Hodgkin Building=09=09=[email protected]
> Guys Campus
> London Bridge
> London
> SE1 1UL
> --------------------------------------------------------------------
>=20
>=20
> _______________________________________________
> FlexNet mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/flexnet
>=20
>=20
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
>=20
> --__--__--
>=20
> Message: 3
> From: "F5GVH" <[email protected]>
> To: <[email protected]>
> Subject: Re: [FlexNet] RMNC help
> Date: Thu, 4 Jul 2002 15:30:53 +0100
> Reply-To: [email protected]
>=20
>=20
> ----- Original Message -----=3D20
> From: "STEPHEN C J BUNTING" <[email protected]>
> To: <[email protected]>
> Sent: Thursday, July 04, 2002 4:16 PM
> Subject: [FlexNet] RMNC help
>=20
>=20
> > Hi all,
> >=3D20
> > I have just inherited an RMNC node. It is out of service at the =3D
> moment,
> > and only have a little information on the system and that is in
> > german. Can anyone a) point me towards to full info for the RMNC
> > hardware (in Englifh or French... I dont speak German) and b) help me
> > get it going... i.e. be willing to exchange emails with me every month
> > or so as I try to get the node back on the air. Point b is a lot to =3D
> ask,
> > but without any info I don't know where to start !
> >=3D20
> > As far as I know there is only one RMNC node active in the UK at the
> > moment and I can't get hold of the sysop so I am turning to you guys
> > (and gals)
> > 73
> > Steve
> > M0BPQ
> > -------------------------------------------------------------------
> > Steve Bunting
> > Neural Damage and Repair, Tel 0207 848 6268
> > Neuroscience Research Centre,=3D20
> > King's College London
> > Hodgkin Building [email protected]
> > Guys Campus
> > London Bridge
> > London
> > SE1 1UL
> > --------------------------------------------------------------------
> >=3D20
> >=3D20
> > _______________________________________________
> > FlexNet mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/flexnet
>=20
>=20
> --- StripMime Report -- processed MIME parts ---
> multipart/mixed
> text/plain (text body -- kept)
> application/msword
> application/msword
> application/msword
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
>=20
> --__--__--
>=20
> Message: 4
> From: [email protected]
> To: [email protected]
> Date: Thu, 04 Jul 2002 20:08:38 +0100
> Subject: Re: [FlexNet] RMNC help
> Reply-To: [email protected]
>=20
> Well there's more than one RMNC running in the UK
> GB7WK, GB7OAR, GB7CH, GB7SAM.
>=20
> The man you need to contact is G4OAR or me GM7HUD. Neil G4OAR is back=20
> from holiday now. I know because we were at the Friedrichshafen Rally.
>=20
> Where did you get it from? I have a good idea because I know who I sold=
=20
> all the hardware to!
>=20
> What hardware do you think you have?
>=20
> 73 Andy GM7HUD
>=20
> please reply to [email protected] and not to this email.
>=20
>=20
> 04/07/02 16:16:36, STEPHEN C J BUNTING <[email protected]>=20
> wrote:
>=20
> >Hi all,
> >
> >I have just inherited an RMNC node. It is out of service at the=20
> moment,
> >and only have a little information on the system and that is in
> >german. Can anyone a) point me towards to full info for the RMNC
> >hardware (in Englifh or French... I dont speak German) and b) help me
> >get it going... i.e. be willing to exchange emails with me every month
> >or so as I try to get the node back on the air. Point b is a lot to=20
> ask,
> >but without any info I don't know where to start !
> >
> >As far as I know there is only one RMNC node active in the UK at the
> >moment and I can't get hold of the sysop so I am turning to you guys
> >(and gals)
> >73
> >Steve
> >M0BPQ
> >-------------------------------------------------------------------
> >Steve Bunting
> >Neural Damage and Repair,=09=09Tel 0207 848 6268
> >Neuroscience Research Centre,=09=09
> >King's College London
> >Hodgkin Building=09=09=[email protected]
> >Guys Campus
> >London Bridge
> >London
> >SE1 1UL
> >--------------------------------------------------------------------
> >
> >
> >_______________________________________________
> >FlexNet mailing list
> >[email protected]
> >http://mailman.qth.net/mailman/listinfo/flexnet
> >
>=20
>=20
>=20
>=20
> --__--__--
>=20
> Message: 5
> From: "Tom Howarth" <[email protected]>
> To: <[email protected]>
> Subject: Re: [FlexNet] RMNC help
> Date: Thu, 4 Jul 2002 21:45:13 +0100
> Reply-To: [email protected]
>=20
> There are actually three RMNC Flexnet nodes running in the this part of t=
he
> UK, the biggest being at GB7OAR. The sysop is Neil, G4OAR and I have copi=
ed
> this message to him. I have an English copy of RMNCFLEX.DOC which is date=
d
> June 1995 and is the "Sysop-Documentation Software" if you would like me =
to
> e-mail it to you, drop me a line at [email protected]
>=20
> 73, Tom
>=20
> G4BKF@GB7OAR
> [email protected]
>=20
> ----- Original Message -----
> From: "STEPHEN C J BUNTING" <[email protected]>
> To: <[email protected]>
> Sent: Thursday, July 04, 2002 4:16 PM
> Subject: [FlexNet] RMNC help
>=20
>=20
> > Hi all,
> >
> > I have just inherited an RMNC node. It is out of service at the moment,
> > and only have a little information on the system and that is in
> > german. Can anyone a) point me towards to full info for the RMNC
> > hardware (in Englifh or French... I dont speak German) and b) help me
> > get it going... i.e. be willing to exchange emails with me every month
> > or so as I try to get the node back on the air. Point b is a lot to ask=
,
> > but without any info I don't know where to start !
> >
> > As far as I know there is only one RMNC node active in the UK at the
> > moment and I can't get hold of the sysop so I am turning to you guys
> > (and gals)
> > 73
> > Steve
> > M0BPQ
> > -------------------------------------------------------------------
> > Steve Bunting
> > Neural Damage and Repair, Tel 0207 848 6268
> > Neuroscience Research Centre,
> > King's College London
> > Hodgkin Building [email protected]
> > Guys Campus
> > London Bridge
> > London
> > SE1 1UL
> > --------------------------------------------------------------------
> >
> >
> > _______________________________________________
> > FlexNet mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/flexnet
>=20
>=20
>=20
> --__--__--
>=20
> _______________________________________________
> FlexNet mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/flexnet
>=20
>=20
> End of FlexNet Digest
>=20